To program the weekly schedule on your Anslut 023265 Bathroom Heater, follow these straightforward steps:
- Power On: Start by pressing the power switch to turn on the heater.
- Enter Programming Mode: Use the remote control and press the "P" button. This will activate the weekly programming mode, indicated by the "P" status light illuminating.
- Select the Day: Press the DAY button to choose the day of the week you want to schedule (d1 for Monday, d2 for Tuesday, and so on up to d7 for Sunday).
- Choose a Period: Press the EDIT button to select the period you want to schedule (P1, P2, up to P6). You can set up to six different periods for each day.
- Set the Start Time: Use the TIME/ON button to set the time you want the heater to start (from 00 to 24, representing the hours). Note that you cannot set the minutes.
- Set the Off Time: Use the TIME/OFF button to set the time you want the heater to turn off (also in hours, 00 to 24). Ensure the off time is not earlier than the start time.
- Set the Temperature: Use the + or - buttons to set the desired temperature for the selected period.
- Confirm Settings: Press OK to save your settings.
- Add More Periods: Repeat steps 4 through 8 to add additional on/off periods for the same day.
- Schedule Other Days: Repeat steps 2 through 8 to program the schedule for the other days of the week.
- Activate/Deactivate the Program: Press "P" to activate the weekly program (the P light will stay on) or to deactivate it (P light off).
- Verify Settings: You can review your programmed settings by pressing DAY, EDIT, TIME/ON, and TIME/OFF.
Important Notes: If the start and off times are the same, the heater will go into standby mode. If you don't set a specific temperature, the default setting of 23°C will be used. The heater will not turn on if the room temperature is already above 23°C. Remember, the weekly program will be erased if you switch the product off.
