Setting up your AirMyFun HDMX735 OutDoor Inflatable Water Slide safely ensures a fun experience for everyone. Here's a step-by-step guide:
-
Preparation:
- Clear the setup area of any sharp objects or debris.
- Choose a flat, soft surface for the water slide, maintaining a safety zone of at least 2 meters around it. Avoid concrete or asphalt.
-
Inflation and Setup:
- Place the blower in a dry location, away from water.
- Connect the inflation tube to the blower and plug the blower into a 110-120V outlet.
- Secure the inflatable structure to the ground by firmly pushing the stakes into the base.
- Keep the blower running continuously while the slide is in use.
-
Water Pipe Setup:
- Locate the water pipe, sprinklers, and hose clamp.
- Match the sprinkler serial numbers with the corresponding numbers on the water slide.
- Route the water pipes along the Velcro lines after confirming sprinkler positions.
- Attach the hose connector to a standard garden hose.
-
Usage and Safety:
- Always supervise children while they are playing.
- Check the water slide and power sources before each use.
- Ensure all children are out of the slide before deflating it.
- Follow all warnings and safety guidelines provided in the manual, especially those regarding water and electrical safety.
- Do not use the water slide in inclement weather.
-
Deflation and Storage:
- Make sure all children are out of the water slide before deflating.
- Turn off and unplug the blower, and then remove the stakes.
- Carefully fold the water slide to remove the air and store it in the provided transport bag.
Following these steps will help you set up and use your AirMyFun HDMX735 OutDoor Inflatable Water Slide safely and enjoyably.
