Setting up and operating your CONIC DESIGN AMS36 Admirror Strobe involves several key steps. First, upon receiving your fixture, carefully inspect the packaging for any shipping damage and ensure all components, including screws and the reflective lens, are present and intact. For installation, choose a suitable location and angle for your strobe. Connect the power supply and ground wire before turning on the power. Professional grounding is recommended for safety. Before use, verify the power supply voltage. If voltage fluctuations are common in your area, consider using a stabilized voltage source or a voltage regulator to protect the fixture. Always disconnect the power supply before any installation or maintenance. Ensure the fixture's fan port remains unobstructed for adequate ventilation. The AMS36 Admirror Strobe is designed primarily for indoor use; if using it outdoors, take necessary waterproof precautions. Before operating, familiarize yourself with the fixture's functions to prevent accidental damage. Avoid direct eye contact with the light source. Do not shake the fixture during operation. To prolong the lifespan of your strobe, avoid prolonged use in humid environments. The CONIC DESIGN AMS36 Admirror Strobe supports various DMX512 channel modes (16CH, 22CH, and 117CH), each offering different functions and effects. Consult the user manual for detailed channel configurations and specific values. The fixture operates on a voltage range of 100V-240V/50-60Hz, consumes 700W, and features 1296 RGB 3-in-1 LED bulbs with 36 mirror lenses. It has a wide 120° beam angle and an IP20 rating. By following these instructions and referencing the user manual for DMX channel settings, you can effectively utilize the CONIC DESIGN AMS36 Admirror Strobe for your lighting applications.
