To get your Livox LiDAR sensor up and running with Livox Viewer 2, follow these steps. First, ensure your Livox device is connected to a 12V power source. Then, connect it to your computer using a network cable. If you're using a router, plug the cable into a LAN port, not the WAN port, to avoid any issues. It's also important to disable your computer's firewall to allow data transmission from the Livox device. Next, set a static IP address on your computer (for example, 192.168.1.2) when connected to the Livox sensor, using a subnet mask of 255.255.255.0 and a default gateway of 192.168.1.1. Make sure your computer has a compatible driver for your display adapter, as Livox Viewer 2's performance relies on your graphics card. Download the latest version of Livox Viewer 2 from the official Livox website and install it. Once installed, open Livox Viewer 2 and get familiar with the toolbar, which offers functions like device management and point cloud display. Connect to your Livox device, start capturing data, and record point cloud images as needed. You can also adjust device parameters through the settings interface. For firmware updates, use the firmware upgrade option in the menu, following the on-screen instructions. Finally, explore additional features like file conversion, noise filtering, and color coding. Refer to the Livox Viewer 2 user manual for more detailed instructions and troubleshooting tips.
