How do I select the canopy finish for my Progress Lighting brushed nickel pendant?

[DelCooper]

Choosing the right canopy finish for your Progress Lighting P500386-193 One Light Pendant in Brushed Nickel is straightforward. The instruction manual provides three finish options: Brushed Nickel (009), Matte Black (31 M), and Vintage Brass (163). Here's how to incorporate the finish selection into the installation process: First, assemble the round mounting plate with screws and hex nuts. Then, pass the wire through the cord bushing out of the canopy assembly. Adjust the cord length and tighten the strain relief set. Next, strip 3/8" of insulation from the electrical wire ends and connect the WHITE fixture wire to the WHITE supply wire, and the BLACK fixture wire to the BLACK supply wire using wire nuts. Connect the fixture ground wire and supply ground wire. Now, select your preferred canopy finish and pass the wire through the cord bushing again. Secure the fixture to the screws using the cylinder nuts. Finally, attach the shade by sliding the "U" slot onto the fixture and secure it with the cord bushing, and thread in a 100-watt MAX incandescent medium base lamp, SBCFL, or SBLED. Following these steps ensures you successfully choose and install the canopy finish of your Progress Lighting pendant.