···
Log in / Register

How do I secure and release the locking feet on my FITBENCH STUDIO?

1Answers
JamesonFitz
12/17/2025, 10:22:45 AM

To safely use your FITBENCH STUDIO, understanding the locking feet is essential. Here's how to engage and disengage them: To engage the locking feet: 1. Find the engaging foot pedals located under the rope slot handle on the side of the bench where the slam balls are stored. 2. Step on either or both of the larger pedals using the toe of your shoe. 3. Simultaneously, pull up vertically on the U-mount anchor point, which is directly above the pedals, near the top of the bench. You can also use the rope slot handle to assist. 4. Continue pressing down on the pedals and pulling up on the U-mount until you hear a click, indicating the locking feet are engaged. To disengage the locking feet: 1. Simply step down on the smaller pedal located on both sides of the bench with your toe. 2. Move the FITBENCH to the desired location. 3. To re-engage the locking feet, repeat the engagement steps. Remember, the FITBENCH STUDIO's 3rd wheel facilitates easy movement on hard surfaces like rubber, wood, or concrete. However, it may be more challenging to move on carpet, turf, grass, or other soft surfaces. Always ensure your FITBENCH is on a level surface before engaging the locking feet to ensure stability and safety during your workouts.

Was this review help?
110
Share
More Q&A

How can I connect my SOMOGYI ELEKTRONICS BT 201 sound system to my devices?

Connecting your SOMOGYI ELEKTRONICS BT 201 2.1 Multimedia Sound System to your devices is straightforward. Here's how: Wired Connection: Connect the two broadband sound boxes to the active subwoofer. Use the supplied speaker wire to connect the left and right channel sound boxes to the subwoofer. Plug the FM antenna into its slot on the subwoofer. Connect the subwoofer to a power outlet and switch it on. Ensure all connections are secure. Wireless BT Connection: Press the INPUT button on the remote control or the control panel to select BT mode. A flashing BT sign will appear on the display. Follow your device's instructions to pair it with the sound system. Once paired, the BT mark will light continuously, and you'll hear a confirmation sound. You can now stream music wirelessly. AUX-Stereo Audio Input (Line In): Plug one end of the audio cable into the sound system and the other into your device (e.g., phone). Turn on the source device and start playback if needed. Adjust the volume on both devices for optimal sound. Radio (FM): Connect the supplied antenna to the FM ANT socket. Press the AUTO/II or SCAN button to automatically tune and store radio stations. Use the CH-/CH+ buttons to cycle through the saved stations. USB-MP3 Playback: Insert a USB device into the USB socket. The system will switch to USB playback mode. Use the controls to play, pause, skip tracks, and adjust playback settings. Make sure your USB device is properly formatted and contains compatible audio files. Following these steps ensures a successful connection to enjoy your SOMOGYI ELEKTRONICS BT 201 sound system.
107
Share

How long should I charge my PAJ 4G Allround Finder initially

When you first receive your PAJ 4G Allround Finder, it's essential to charge it fully before use. The instruction manual recommends an initial charging time of approximately 8 to 12 hours. To charge the device, use the charging cable that came with your PAJ 4G Allround Finder, and plug it into a USB wall adapter. Connect the cable to the finder and then to a power source. You'll know it's fully charged when the red LED indicator light on the device illuminates. Fully charging your PAJ 4G Allround Finder before its first use is crucial for optimal battery life and performance.
116
Share

How do I connect my NETTA Electric Glass Panel Heater to Wi-Fi via the Smart Life app?

To connect your NETTA Electric Glass Panel Heater to Wi-Fi using the Smart Life app, follow these steps: Download and Install the Smart Life App: Begin by downloading the Smart Life app on your smartphone or tablet. You can find it by searching "SmartLife" in the Google Play Store (for Android devices) or the Apple App Store (for iOS devices). Alternatively, scan the QR code provided in your NETTA Electric Glass Panel Heater's manual. Create a Smart Life Account: Open the Smart Life app and create an account if you don't already have one. Tap "Register" and enter your phone number or email address. You'll receive a verification code; enter this code in the app and create a secure password. Put the Heater in Wi-Fi Connection Mode: Ensure your NETTA Electric Glass Panel Heater is in Wi-Fi connection mode. The Wi-Fi icon on the heater should be flashing. If it isn't, put the heater in standby mode and press and hold the power button for approximately three seconds until the Wi-Fi indicator begins to flash. Add Your NETTA Heater in the Smart Life App: In the Smart Life app, tap "Add Device" or the "+" icon. Select "Small Appliances" and then choose "Heater" from the device list. Confirm that the indicator on your NETTA heater is flashing. Enter Your Wi-Fi Password: The app will prompt you to enter your Wi-Fi network password. Input your password to allow the app to connect to your home Wi-Fi network and search for your NETTA heater. Troubleshooting Connection: The app will display a connecting screen. If the initial connection attempt fails, try switching to the second connection mode. Press and hold the power button on the heater for another three seconds; this should cause the Wi-Fi icon to flash faster. The app may then be able to discover the heater. Complete the Setup: Once the connection is successful, your NETTA Electric Glass Panel Heater will beep, and the Wi-Fi icon will display as a solid, non-flashing icon. The Smart Life app will confirm that your heater has been successfully added. You can now personalize your experience by naming the device, sharing it with family members, or setting up a heating schedule.
115
Share

Can I add another door sensor to my Chamberlain MYQ-G0401 Smart Garage Control?

Absolutely! You can add a second door sensor to your Chamberlain MYQ-G0401 Smart Garage Control to monitor and control a second garage door opener. Here's how to pair the additional sensor: First, open the myQ app on your smartphone or tablet. Then, tap the plus (+) symbol within the app to initiate the process of adding a new door sensor. The app will guide you through the pairing steps, providing on-screen instructions to connect the second sensor to your Smart Garage Control hub. Once paired, be sure to mount the second door sensor securely. Choose a clean, dry location on the top panel of your second garage door. You can use the provided hook and loop adhesive strips or, for a more permanent solution, use screws. Finally, for optimal performance, remember to check the door sensor's battery every six months. Following these steps ensures you can successfully integrate and utilize a second door sensor with your Chamberlain MYQ-G0401, giving you complete control over two garage doors through the myQ app.
107
Share

How can I clean and maintain my CROWNFUL IM2200-UL Portable Ice Maker Countertop to keep it working well?

To keep your CROWNFUL IM2200-UL Portable Ice Maker Countertop clean and running smoothly, follow these maintenance steps. First, stop the ice-making process by pressing the "►II" button, wait five minutes, and unplug the unit. If any water remains in the ice tray, carefully push the tray back to drain the water into the water reservoir. Next, move the ice maker away from the counter by about 60mm and open the drain plug to remove excess water. Make sure to close the drain plug securely afterward. Fill the water reservoir with fresh water, press the " " button until the ' ' indicator flashes, and then press the "►II" button. The pump will circulate water for about 6 minutes before going into standby mode. After this, open the drain plug again to empty the water. Remove the ice basket. Clean the ice maker's interior using a soft cloth dampened with warm water and vinegar; rinse with clean water and drain. Wash the ice basket and ice scoop with warm, soapy water, rinse them, and then dry them. Wipe the ice maker's exterior with a soft, damp cloth; mild dish soap can be used if needed. Avoid using organic solvents, boiling water, detergents, strong acids, or strong alkalis when cleaning. If you won't be using the ice maker for a while, empty and dry the water reservoir before storing it. Regular cleaning and maintenance will ensure your CROWNFUL ice maker continues to make high-quality ice.
112
Share

What is the full charging time for the e-TWOW GT2020 electric scooter?

The e-TWOW GT2020 electric scooter takes roughly 4 to 4.5 hours to fully charge its battery. This charging time is based on using a 3A charger, as specified in the e-TWOW GT2020's manual. To ensure the best performance and longevity of your electric scooter's battery, always use the correct charger and adhere to the suggested charging duration.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.