···
Log in / Register

How do I schedule feeding times on my Espelho DU5L-KH Elevated Automatic Cat Feeder?

1Answers
LeKate
12/17/2025, 07:41:29 AM

Setting up your Espelho DU5L-KH Elevated Automatic Cat Feeder's feeding schedule is easy. Here's how:

  1. Unlock the Screen: Press and hold the unlock key for 3 seconds.
  2. Enter Setting Mode: Press and hold the setting button for 3 seconds.
  3. Set the Hour: The time icon "0000" will flash, indicating the hour setting. Use the up and down buttons to select the hour.
  4. Set the Minute: Press the set button to move to the minute setting. Use the up and down buttons to set the minutes.
  5. Set Meals Per Day: After setting the current time, press the set button. The display will flash the number of meals. Use the up and down buttons to choose the desired number of meals per day (1-4 meals).
  6. Review Meal Count: Once the number of meals is set, the display will flash the current number of meals, confirming your selection.
  7. Set Meal Time: Press the set button to program the first meal's time. The hour field will flash; use the up and down buttons to set the hour.
  8. Set Meal Minutes: Press the set button again and use the up and down buttons to set the minutes for the first meal.
  9. Set Meal Portion: Press the set button to set the portion size for the first meal. The portion number will flash; use the up and down buttons to adjust.
  10. Repeat for Additional Meals: If you've selected more than one meal per day, repeat steps 7-9 for each additional meal (up to 4 meals).
  11. Automatic Feeding: Once programmed, the Espelho DU5L-KH will automatically dispense food according to your schedule.

For more detailed visual instructions, please consult the Espelho DU5L-KH user manual.

Was this review help?
120
Share
More Q&A

How do I control the brightness of my KOOKIN USB Dual Supply Bathroom Beauty Cosmetic Mirror's LED lights?

Adjusting the brightness of your KOOKIN USB Dual Supply Bathroom Beauty Cosmetic Mirror's LED lights is simple. First, ensure the mirror is powered on using the switch located on the back, near the battery compartment. To change the brightness, use the touch sensor on the mirror's front. A quick tap turns the lights on or off. To adjust the brightness, press and hold the touch sensor. The lights will gradually increase or decrease in brightness until you release the sensor at your desired level. The mirror conveniently remembers your preferred brightness setting for next time. If you experience any difficulties, consult the instruction manual or contact customer support for further assistance.
112
Share

How do I assemble the JAXSUNNY HG61W0686 white vanity dressing table with stool

Assembling your JAXSUNNY HG61W0686 white vanity dressing table with stool is straightforward. Here is a step-by-step guide to help you: Step 1: Attach the table leg (8) to the desktop (6) using xxxx (A). Step 2: Secure the wooden support (2) onto the desktop (6) with screws (D). Then, connect the drawer frame (0) and wooden support (2) using xxxx (C). Step 3: Mount the mirror (1) onto the wooden support (2) using xxxx (B). Step 4: Place the small drawer (4), the big drawer (7), and the storage box (5) into their designated locations. Your dressing table is now assembled. Step 5: Attach the stool legs (10) to the cushion (9) using screws (A). The stool is now assembled. Step 6: You have now finished assembling the JAXSUNNY HG61W0686 white vanity dressing table and stool. For detailed visual guidance, always consult the official JAXSUNNY HG61W0686 user manual, which provides diagrams and further clarification. If you face any challenges, the manual is your best resource.
117
Share

How do I connect my laptop to a Pomya Home Theater Movie Projector for presentations?

Connecting your laptop to your Pomya Home Theater Movie Projector is straightforward. First, identify the ports available on both your laptop and the projector. The Pomya projector offers various input options, including HDMI, VGA, USB, and AV. If your laptop has an HDMI port, the simplest method is to use an HDMI cable to connect directly to the projector's HDMI input. Plug one end into your laptop and the other into the projector. Alternatively, if your laptop uses a VGA port, use a VGA cable for the connection. Connect one end to your laptop's VGA port and the other to the projector's VGA input. If your laptop lacks HDMI or VGA ports, consider adapters. For example, a USB-C to HDMI or USB-C to VGA adapter can connect to the projector. After connecting the cable, power on the projector and select the corresponding input source using the projector's remote. On your laptop, check your display settings to ensure the projector is recognized as a secondary display. You can then adjust the settings, such as extending or duplicating your display. Once set up, start your presentation on your laptop, and the projector will display the content on the screen. Remember to adjust the focus and keystone correction on the projector for a clear and well-aligned image. For more detailed instructions and troubleshooting, consult the Pomya Home Theater Movie Projector's user manual.
105
Share

How do I switch the language on my Magnasonic FS50 Film Scanner?

If you've accidentally selected an unfamiliar language on your Magnasonic FS50 All-In-One 24MP Film Scanner and need to revert to English, here's how: Access the Main Menu using the appropriate button on your scanner. Use the navigation arrows (usually up, down, left, and right) to find and highlight the "LANGUAGE" option. Press the "OK" button (or the equivalent button to select options) to enter the language settings. Use the navigation arrows, specifically the "<" and ">" buttons, to scroll through the available language choices. Select "English" by highlighting it. Confirm your selection by pressing the "OK" button. The display language will now be set to English. For more detailed instructions, including visual aids, consult page 2 of your Magnasonic FS50 user manual.
103
Share

How do I change the image orientation between mirror and forward-facing on my DAKOTA MICRO RazerCam CVBS 120° NTSC camera?

To adjust the image orientation on your DAKOTA MICRO RazerCam CVBS 120° NTSC (PAL) camera, you can switch between mirrored and forward-facing modes. Here's how: First, locate the small loop of green wire near the 5-pin connector on your camera; this is the mirroring switch. When the circuit is complete, meaning the wire loop is intact, your camera image will be mirrored. If you cut this wire loop, thus making the circuit incomplete, your camera will be in forward-facing mode. For safety, it's recommended to insulate the exposed wire ends with shrink wrap or electrical tape to prevent any potential shorts. If you're using a Dakota Micro monitor, you can also adjust the mirroring settings there, but remember that the camera will need to be rebooted (powered off and on) for the change to take effect.
118
Share

My BRAUN CareStyle 7 Steam Generator Iron (Type 12870020) is flashing the FastClean icon How do I descale it?

To descale your BRAUN Type 12870020 CareStyle 7 steam generator iron, follow these steps: First, switch off and unplug the iron, and empty the water tank. Allow it to cool down for at least 2.5 hours. Next, place the appliance near a sink and open the closure (10) by turning it anticlockwise, allowing the water to drain out. Clean the closure under running water to remove any scale. Once all the water is out, close the boiler by turning the closure clockwise. Then, plug in and switch on the appliance. Finally, press the FastClean system button (3) for two seconds to reset the indicator. If the FastClean icon persists after turning on, repeat the descaling process after every four refills, or at least once a month. Always ensure the iron is turned off, unplugged, and cooled before cleaning. Never use chemicals or additives for descaling, and always refer to the BRAUN user manual for specific instructions to maintain optimal performance and extend the life of your steam generator iron.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.