Installing your Globe Bulb Black Wall Light safely involves several steps. Always prioritize safety by turning off the electricity at your fuse box before you begin. First, note the position of existing wires before removing the old fixture. If there are unused loop-in cables, ensure they are properly terminated. Next, detach the bracket from the wall plate by unscrewing the side screws. Use the bracket as a template to mark and drill holes on the wall, then secure the bracket using appropriate screws. Carefully connect the cables, covering each L, N, and Earth wire with the provided sleeving and securing them with the plastic belt. Insulate the connections with electrical tape. Attach the fixture by connecting the supply wires to the terminal block, matching the L/N/E positions. Push any excess cable into the wall and secure the wall cup with screws. Finally, install the correct bulb type and wattage, as indicated on the fixture. Then, install the glass shade. Once everything is in place, you can restore power at the fuse box. For safety, always adhere to local wiring and building codes. If you're uncertain about any step, consult a qualified electrician. Use the recommended bulb wattage and type. Remember to switch off the power before changing the bulb and allow it to cool. Handle the bulb with a cloth. Clean the Globe Bulb Black Wall Light with a soft, dry cloth; avoid polish or abrasive cleaners.
