Connecting your LUMENTruss E491159 Series LED Strip Tape luminaire to a power supply requires careful attention to ensure both safety and proper function. Here’s a step-by-step guide:
-
Low Voltage Connection:
- Identify the black wire from the LED tape; this is the negative (-) connection. Connect it to the black output wire from your low voltage power supply.
- Connect the white or red wire from the LED tape (positive, +) to the corresponding white or red output wire from the power supply.
- Use appropriate twist-on connectors to securely and safely isolate these wire connections.
-
Plug-In Connection with DC Plug:
- If your setup uses DC plugs, simply connect the input connector of the LED tape directly to the output connector of the low voltage power supply.
-
Line Voltage Connection (for hardwired setups):
- Begin by passing the main power feed and the power supply input cable into a junction box.
- Connect the white (Neutral) wires from both the power feed and the power supply together.
- Connect the black (Live) wires from the power feed and the power supply.
- Connect the copper, green, or yellow (Ground) wires from the power supply, power feed, and junction box. Ensure these are securely connected using appropriate twist-on connectors.
- Finally, install the junction box cover to complete the connection.
Important Safety Tips:
- Always turn off the power at the electrical panel before beginning any installation or maintenance work to prevent the risk of electric shock.
- Make certain that the installation adheres to all current national and local electrical codes to ensure safety and compliance.
- Consult the wiring diagrams provided in the manual for your specific LUMENTruss E491159 model, as connection options may vary depending on the LED tape and any dimmer types used. Following these guidelines will help you connect your LUMENTruss LED strip safely and effectively.
