How do I safely and effectively start the Husqvarna 345BT Cordless Blower?

[OEliana]

Starting your Husqvarna 345BT Cordless Blower involves a few simple steps. Here's how to get your blower running efficiently and safely, based on the user manual:

Starting a Cold Engine:

1. Move the choke control to the closed position.
2. Press the air purge bulb multiple times to fill it with fuel.
3. Set the throttle control to the fast idle position.
4. Place the blower on a stable, flat surface.
5. Hold the blower securely with one hand and step on the foot plate.
6. Slowly pull the starter rope handle until you feel resistance.

Starting a Warm Engine:

• If the temperature is below 32°C / 90°F, follow the same steps as starting a cold engine.
• If the temperature is above 32°C / 90°F, follow the same procedure but do not close the choke control.

Using the Throttle Trigger:

• Press the throttle trigger to increase the blower speed while in use.
• Release the trigger to decrease the blower speed.

If the Engine is Flooded (Fuel Too Hot):

1. Move the blower to a cooler area, away from direct sunlight.
2. Allow the blower to cool down for at least 20 minutes.
3. Press the air purge bulb for 10-15 seconds.
4. Follow the cold engine starting procedure.

Operating the Blower:

• Operate the blower during appropriate work hours and comply with local regulations.
• Adjust the blower speed as needed for the task.
• Keep the blower nozzle close to the ground for effective performance.

Stopping the Blower:

• Do not stop the blower at full speed.
• Push the stop switch to turn off the engine.

For detailed instructions and important safety information, always consult the full user manual for your Husqvarna 345BT Cordless Blower.