How do I pair and unpair my MiBOXER FUT037Z LED controller with a 2.4G RF remote?

[VonEthan]

Here's how to link and unlink your MiBOXER FUT037Z 3-in-1 LED Controller with a 2.4G RF remote control for seamless control.

To link (pair) the MiBOXER FUT037Z controller with your remote:

1. Switch the controller off, and then back on after a 10-second pause.
2. Within 3 seconds of powering on, quickly press the 'I' button on your remote control three times.
3. If successful, the lights connected to the controller will blink slowly three times, confirming the link.

To unlink (unpair) the MiBOXER FUT037Z controller from your remote:

1. Power off the controller for 10 seconds and then power it back on, or briefly press the 'SET' button once on the controller.
2. Within 3 seconds, quickly press the 'I' button on the remote control five times.
3. If the unlinking is successful, the lights will blink rapidly ten times.

Important points:

• If the lights don't blink as described, simply repeat the linking or unlinking procedure.
• Once a light is successfully paired, it cannot be paired again unless it's unpaired first.
• You only need to go through the unlinking process for lights that are currently paired with the remote. Follow these steps carefully, and you should be able to manage your MiBOXER FUT037Z LED controller effortlessly!