How do I install the Xicato XCC-C-SR14-SA Shallow Rectangle 14 Square Channel?

[DelMargaret]

Installing the Xicato XCC-C-SR14-SA Shallow Rectangle 14 Square Channel involves a few straightforward steps. You'll need a drill and a screwdriver for the basic installation. Here's a guide:

Mounting Instructions:

1. Prepare the Extrusion: Drill holes (minimum diameter of 10 mm) into the extrusion for mounting.
2. Assemble Components: Insert the spring into the isolating base.
3. Install the LED Strip: Mount the LED strip inside the extrusion, and carefully lead the cable out.
4. Close it up: Insert the cover. The power cable can run through a hole drilled in the extrusion or through the end cap.
5. Secure the End Caps: Slide the spring into the extrusion and insert the end cap.
6. Connect Power: Connect the power supply and insert the extrusion.

Mounting with a Bracket:

1. Prepare the Power Cable: Feed the power cable through the appropriate channel.
2. Attach the Bracket: Secure the mounting bracket to your mounting surface using screws.
3. Install LED Strip and Cover: Mount the LED strip inside the extrusion, route the power cable, insert the cover and end caps. The cable can go through a hole in the extrusion or in the end cap.
4. Final Connections: Connect power to the LED strip and then mount the extrusion into the mounting bracket. You can connect power either through a hole in the extrusion or through the end cap.

Additional Notes:

• Always ensure your LED strips are connected to a 24V power supply.
• These steps are a basic overview. For detailed and specific instructions, always refer to the official Xicato XCC-C-SR14-SA Shallow Rectangle 14 Square Channel installation guide or the product manual.
• For more detailed methods and compatible accessories, please visit the official Xicato website.