Installing the Troy Lighting F5307 Ace Linear Pendant Light requires careful attention to detail. Here's a step-by-step guide to help you: First, carefully unpack the fixture and all its components, checking against the parts list to ensure everything is present before discarding the packaging. Next, determine your desired hanging length, and feed the fixture's wires (lead and ground) through the center of the canopy. Extend these wires approximately 6 inches beyond the center and cut off any excess. Strip the insulation from the wires and twist the strands together. Thread the longest screws into the mounting ring. Attach this ring to the electrical outlet box in your ceiling, ensuring the green ground screw faces down towards the floor. Connect the fixture's ground wire to the ground wire in the outlet box. Use approved wire connectors and electrical tape to connect the white fixture wire to the white wire in the outlet box and the black fixture wire to the black wire in the outlet box. Carefully position the canopy over the screws and against the ceiling, securing it by adjusting the screws and tightening the end nuts against the mounting ring. Now, install the glass components, using the thumb screws and metal disk. Place the glass shade onto the fixture ring. Finally, install the provided G9 lamps, up to a maximum of 40 watts. Remember to restore power at the breaker or fuse box. For complete details and safety information, always consult the Troy Lighting F5307 Ace Linear Pendant Light instruction manual. If you're not comfortable with electrical work, it's recommended to hire a qualified electrician.
