Installing the SEACHOICE 52021 Foldup Trailer Jack correctly ensures your trailer is stable and easy to manage. Here's a step-by-step guide based on the instruction manual:
- Trailer Tongue Compatibility Check: The jack is designed for square or rectangular trailer tongues. A cylindrical tongue isn't compatible and could lead to instability.
- Prevent Trailer Tongue Damage: Avoid drilling or causing any damage to the trailer tongue during installation. This helps maintain the tongue's structural integrity.
- Determine Mounting Location: Measure your trailer tongue to find the optimal mounting spot. Consider the tongue's height (3"-5") and ensure there's enough space for the jack to fold up without obstruction.
- Position the Mounting Plate: For a 3"-4" tongue, mount the plate horizontally. For a 4"-5" tongue, mount it vertically. Position the jack as close to the coupler as possible to prevent overloading.
- Secure with Hardware: Use the included bolts, washers, spring washers, and nuts to attach the jack. Place the rotating plates so the bolts are near the top and bottom edges of the tongue. Insert the bolts from the rotating plate side.
- Test the Jack: After installation, test the jack by rotating the crank clockwise to raise and counterclockwise to lower it. Confirm that it locks securely in both positions.
- Adjust and Tighten: Make any necessary adjustments and firmly tighten the mounting hardware to 20-25 ft. lbs. Use a torque wrench for accurate tightening.
