How do I install the SCOTT TQ HPR Range Extender V01 160 Wh on my e-bike using the FIDLOCK system

[VanOlive]

To correctly install the SCOTT TQ HPR Range Extender V01 160 Wh on your e-bike with the FIDLOCK system, follow these steps: First, mount the FIDLOCK Bike Base to your e-bike frame. Use only the provided ISO 7380–1 M5 × 10 A2 button head screws, tightening them to a torque of 2 Nm, or as specified by your bike's manufacturer. Next, fasten the FIDLOCK Force Connector to the Range Extender using the provided ISO 4762 M4 × 16 A2 cylinder screws, tightening these to 1.0 Nm. Now, insert and lock the Range Extender onto the FIDLOCK Bike Base by placing it diagonally, ensuring the pin on the base slides into the connector's socket. An audible click confirms it's locked. Secure the Range Extender further by pushing the FIDLOCK system's locking tab fully in. Always lock it before riding. After that, connect the connection cable to the Range Extender's socket, fastening it with the provided M3 × 8 socket head screws. Be careful not to use longer screws to avoid damaging the electronics. Finally, connect the connection cable to your e-bike's charging port, aligning the connector and securing it with the cover. Following these steps ensures your SCOTT TQ HPR Range Extender V01 160 Wh is correctly and securely attached to your e-bike.