Installing your Roll Hill MODL5 Modo Ceiling Mount requires careful attention to safety and the following steps:
Safety First:
- Use only one light bulb per socket.
- This ceiling mount is designed for direct installation on non-combustible surfaces only.
- Avoid mounting the Modo Chandeliers on surfaces that are easily flammable.
- This product is intended for dry, indoor environments.
- Ensure the ambient temperature does not exceed 25˚C.
Installation Steps:
- Consult a licensed electrician for all installation work.
- Use light bulbs that do not exceed 25 watts.
- Attach the crossbar (A) to the junction box using the provided screws (B).
- Thread the 1/8 IPS fitting (C) into the center hole of the crossbar and feed the electrical wires through it.
- Place the backplate (D) over the fitting and secure it by threading the mounting bracket (E) onto the fitting. Make sure the canopy is flush against the wall.
- Connect the electrical wires to the sconce, trim any excess wire, and carefully push the connected wires into the half hub.
- Fit the hub over the mounting bracket and secure it using the provided screws (F) and Allen key.
Attaching the Modo Globes:
- Sandwich the glass globe (A) around the socket fitter (B) and cap (C).
- Gently tighten the sleeve (D) to hold the globe securely in place.
Important Safety Reminders:
- This ceiling mount is suitable for dry, indoor use only.
- Do not operate if the ambient temperature exceeds 25˚C.
- If the external flexible cable or cord is damaged, it must be replaced by Roll & Hill or a qualified professional to avoid any safety hazards.
- The light source in this fixture should only be replaced by the manufacturer or a qualified individual. Following these guidelines will help ensure a safe and successful installation of your Roll Hill MODL5 Modo Ceiling Mount.
