How do I install the Lightpro Tiga DL Wall Light for optimal outdoor lighting?

[DiPhoebe]

Installing the Lightpro Tiga DL Wall Light is straightforward. Here's how to do it, whether you're mounting it on a wall or placing it in the ground:

Wall Mounting:

1. Remove the necessary components from the ground spike, using the Allen key.
2. Attach the retaining clip to the wall, ensuring the clamping part faces upward.
3. Slide the Tiga DL fixture onto the retaining clip, choosing either an uplight or downlight configuration.

Ground Positioning:

1. Affix the retaining clip to the ground spike using the appropriate components and Allen key.
2. Slide the ground spike, with the attached retaining clip, into the Tiga DL fixture.
3. Gently push the fixture into the ground to secure it.

Additional Tips for Installation:

• Use the button on the fixture to select your preferred light output from the available options.
• Position the lights as desired, and carefully run the cables for connection to the transformer or the main cable.
• If your fixture has drain holes, make sure they are facing downwards to prevent water accumulation.
• When bolting down the products, always use non-corrosive fixing materials to prevent damage.
• Connect the lights to the main cable using the appropriate connector.
• For more detailed information, consult the Lightpro transformer manual.

By following these steps, you can successfully install your Lightpro Tiga DL Wall Light and enjoy the benefits of your new outdoor lighting setup.