To install the diffuser on your LITHONIA LIGHTING DLSD16 Small Half Inch Cylinder with Frame, follow these steps. First, it is crucial to ensure all parts are included by removing the components and parts packs. Before commencing, turn off the power at the circuit breaker for safety. Installation steps vary slightly depending on the specific model. For DLSD1, DLSD2, DLSD5, DLSD7, DLSD8, DLSD9, DLSD10, DLSD11, DLSD12, DLSD16 & DLSD17 models: Install Mounting Brackets by inserting xxxx through the hole and the slot in the bracket, securing them to the housing. Position the Diffuser over the Mounting Brackets, aligning the holes and securing it with Screws. For DLSD7, DLSD8, DLSD9 & DLSD17 models: Align the holes in the Prong Assembly with the holes in the bottom of the mounting brackets and secure them with Screws. For DLSD13, DLSD14 & DLSD15 models: Install Screws into the outermost holes in the Mounting Bracket, then insert the mounting bracket, securing it to the housing with a xxxx through the hole and a second xxxx through the slot in the bracket. For DLSD6 model: Install the Mounting Bracket by inserting a xxxx through the hole in the mounting bracket, securing it to the housing, and a second xxxx through the slot. If the fixture doesn't operate correctly, verify proper wiring, grounding, and line voltage. For further assistance, contact Technical Support at (800) 748-5070.
