How do I install the DESIGNERS FOUNTAIN EVT41052D3-35 4-Light Contemporary Flush Mount?

[EliasDella]

Absolutely! Here's a straightforward guide to installing your DESIGNERS FOUNTAIN EVT41052D3-35 4-Light Contemporary Flush Mount. Remember, safety first! Before you begin, turn off the power at the circuit breaker to prevent electrical hazards.

Here’s how to proceed:

1. Remove any protective film from the fixture.
2. Gather your tools: a Phillips screwdriver, wire strippers, and pliers.
3. You'll have a swivel mounting plate, wire nuts, screws, and mounting screws in the package.
4. Pull the supply wires out from the outlet box.
5. Attach the swivel mounting plate into the outlet box using the provided mounting screws.
6. Connect the black supply wire to the black fixture wire using a wire nut.
7. Connect the white supply wire to the white fixture wire using a wire nut.
8. Connect the ground fixture wire to the supply ground wire using a wire nut.
9. For extra security, use a cable tie below each wire nut.
10. Fasten the small screws into the holes on the sides of the swivel mounting plate.
11. Hook the screws of the swivel mounting plate onto the cutout of the light fixture pan.

Following these steps will help ensure a successful installation of your DESIGNERS FOUNTAIN 4-Light Contemporary Flush Mount. If you need further assistance or have any questions during the process, please contact Customer Service at [phone], available from 8 AM to 6 PM EST, Monday through Friday.