Installing the AKO-55323 Trapped Person Alarm is crucial for safety in your cold room. Here's a step-by-step guide to help you with the installation:
-
Preparation: Start by choosing a suitable location protected from vibrations, water, and corrosive gases. The alarm center should be placed where someone can reliably respond to alerts. Ensure the ambient temperature remains within the specified limits in the technical data.
-
Installation Steps:
- Remove the bezels from the unit.
- Loosen the screws and open the cover.
- Drill holes for the cable entry glands and fix the glands to the device.
- Use the provided template to make holes in the wall.
- Secure the unit to the wall using the supplied screws and plugs.
- Insert the cables into the glands and wire the unit according to the provided diagram.
- Connect the battery before closing the cover.
- Close the cover, tighten the screws, and replace the bezels.
-
Wiring Guidelines:
- Avoid running the wiring between the detector/button and the station in the same conduit as power, control, or feeder cables.
- Always disconnect the power supply before any wiring work.
- Use the correct cables and sections as per local regulations.
- Keep the 120/230 V wiring separate from other external elements.
- Make sure the batteries are connected before powering up the unit.
-
Important Considerations:
- The power supply for the AKO-55323 should come from a different circuit than the cooling and ventilation system.
- The alarm has a self-diagnosis feature to detect malfunctions and wiring errors.
- Regular maintenance involves cleaning the unit with a soft cloth, water, and soap. Proper installation of the AKO-55323 ensures your cold room has a reliable safety system in place to alert individuals in case of entrapment.