Proper installation and adjustment of the Stealth Products Y-Straps Tire Tie Down are key for optimal support. Here's how to do it:
-
Y-Strap Installation:
- Position the upper section of the Y-Strap above and below the rotated shoulder. Attach the belt anchors to the rear of the solid back.
- Stretch the lower strap diagonally across the trunk. Secure the lower portion of the Y-Strap to the back of the solid back.
- Use the tension straps on the top of the Y-Strap to gently pull the rotated shoulder back until the correct positioning is achieved.
-
Swivel Buckle Instructions:
- To detach the swivel buckle, press the button in the middle of the male swivel buckle.
- Remove the male swivel buckle and its attached belt from the female swivel buckle, making any adjustments as needed.
- To reattach, slide the buckle into its housing. An audible click confirms the belt is securely fastened.
-
Side-Release Buckle Instructions:
- To remove the side-release buckle, pinch the buttons on either side of the buckle to release the locking mechanism.
- Slide the male part of the buckle out of the housing and make any required adjustments.
- To reattach the side-release buckle, slide the male part into the housing. A click will confirm the belt is secure.
-
Care and Cleaning:
- Regularly check the product for any wear and ensure it functions correctly. Check the stitching for damage.
- Clean surfaces with a damp cloth and a gentle, non-abrasive cleaner. Machine wash removable vests and straps that don't have metal components.
-
Important Safety Tips:
- Always use a positioning belt with a chest harness.
- Make sure belts and supports are snug, but don't restrict breathing.
- Constantly check the user's posture and ensure the support devices don't interfere with breathing. Following these steps will help you properly install and adjust the Stealth Products Y-Straps Tire Tie Down for effective use.
