Enrolling your 3M IDS1GATEWAY Node or Gateway device in the Dashboard using the Pi-Lit app is a straightforward process. Here's a step-by-step guide:
-
Download the Pi-Lit App:
- Go to the Apple App Store or Google Play Store on your mobile device.
- Search for "Pi-Lit" and download the app.
- Install the app on your device.
-
Login or Create a Profile:
- Open the Pi-Lit app.
- If you are a new user, create a profile by setting up a username and password.
- Log in to the app using your credentials.
-
Enroll the Device:
- Within the Pi-Lit app, locate and select the QR Code Capture Icon; this will activate your mobile device's camera.
- Direct your camera at the QR code located on the label of your Gateway or Node device.
- Keep the camera steady until the app successfully reads the QR code. You might need to adjust the distance for focus.
- Once the QR code is read, the Pi-Lit app will display the asset's information.
- Tap "Add Image" (usually at the top right) to use your camera to take a picture of the newly installed device. This photo helps with device identification.
-
Adjust Sensitivity (Optional):
- After enrolling your device, the impact alert sensitivity will be set to a default value.
- Depending on the type and location of your asset, you might need to adjust the sensitivity level. You can do this through the Dashboard.
- It's recommended to monitor the device during the first week after installation to determine if any sensitivity adjustments are needed.
By following these steps, you can easily and effectively enroll your 3M IDS1GATEWAY Node or Gateway device using the Pi-Lit app, ensuring your impact detection system functions optimally.
