Achieving the perfect height for your HINKLEY 3487PT Argo 14 Inch LED Large Pendant involves a few key steps. First, decide on the desired overall length from the ceiling to the bottom of the pendant. The fixture includes various stem sizes to help you customize this length. Consult the assembly instructions and Drawing 1 to visualize the process. Start by sliding the stems over the wire and threading them onto the top of the pendant, beginning with the longest stem first. Continue adding stems until you reach your desired length. Next, pass the wire through the center hole of the canopy swivel and thread the swivel onto the top stem. For the installation, thread two long 8-32 screws into the bent part of the mounting strap, ensuring they align with the canopy's mounting hole spacing (refer to Drawing 2). Attach the mounting strap to your junction box using two 8-32 screws (not included). Then, connect the electrical wires according to the FRIS18 instruction sheet. It's often helpful to have assistance when mounting the fixture. Carefully lift the assembled pendant to the ceiling and align the mounting bracket screws with the holes in the canopy. Secure the fixture by threading and tightening the ball knobs onto the screws. Always remember to disconnect the power supply before starting any installation work. Refer to the manual for detailed wiring and grounding instructions, and consider consulting a qualified electrician if needed. This ensures a safe and successful installation of your HINKLEY Argo pendant.
