To pair your Bimar GT01-ZG Gateway Zigbee Wireless device with your smartphone, follow these steps: First, plug the Type C (Micro-USB) connector into the gateway and insert the USB into a power adapter (not included). After about a minute, press and hold the button on the back of the gateway for approximately five seconds until the red light starts flashing rapidly. Next, open the "BIMAR life Smart" app on your smartphone. On the main screen, tap "ADD DEVICE" or the "+" icon in the top right corner. Then, select "/Gateway" from the options. Now, set up your Wi-Fi by entering the name and password of your Wi-Fi network and then tap the "Next" symbol to initiate the connection. Confirm your selection on the next screen by tapping "Confirm". The LED will flash quickly. Tap the "Next" symbol again. The app will then start the process, with steps like scanning devices, registering on the cloud, and starting the device. The process concludes when the connection between the gateway and your smartphone is established. If you have trouble, try "AP Mode" by pressing and holding the button until the front light flashes. Access your smartphone's Wi-Fi settings and connect to the "Bimar Live Smart xxx" or "Smart Life xxx" network. Then tap "connect now" within the app. If issues persist, try resetting the device by unplugging it for 30 seconds and then reconnecting it. Press and hold the rear button for about five seconds until the front light flashes rapidly, then release.
