How do I connect my Singing Machine SML385UBK karaoke system to my TV to display lyrics?

1Answers

Pires

12/17/2025, 03:51:12 PM

Connecting your Singing Machine SML385UBK to your TV allows you to view lyrics on a larger screen while you sing karaoke. Here's how: First, locate the RCA video cable (yellow) and the audio cables (white and red) that came with your Singing Machine. On the back of the Singing Machine, connect the yellow RCA video cable to the VIDEO OUT jack. Then, connect the white and red audio cables to the AUDIO OUT jacks (white to the left channel, red to the right channel). Next, connect the other ends of the RCA video cable and audio cables to the corresponding VIDEO IN and AUDIO IN jacks on your TV. Ensure your TV is powered on and set to the correct input/source for the connected jacks; this is usually labeled AV or Video. Now, turn on your Singing Machine using the power ON/OFF button. Insert a CD or CD+G into the machine and press the CDG/BT button to select CDG mode. The lyrics and video from your CD or CD+G should now display on your TV screen. Remember to adjust the volume on both your Singing Machine and your TV for the best audio experience. For visual aids and more detailed information, consult the instruction manual that came with your Singing Machine SML385UBK.

Was this review help?

115

More Q&A

How do I connect my device to the Roomexpert Bluetooth Speaker Galaxy Projector?

Connecting your smartphone or tablet to your Roomexpert Bluetooth Speaker Galaxy Projector is easy. Here's how: Power up the Roomexpert Galaxy Projector by pressing the power button. Enable Bluetooth on your device (phone, tablet, etc.). On your device, navigate to your Bluetooth settings and initiate a device search. Look for "Roomexpert Bluetooth Speaker" in the list of available devices and choose it. Your device should now pair with the projector. Once connected, any audio played on your device will stream through the projector's integrated speaker. If you experience any connection problems, ensure the Roomexpert Bluetooth Speaker Galaxy Projector is within Bluetooth range and that Bluetooth is active on your device. You can also try unpairing and then re-pairing the devices. For a more thorough guide, please see the "Usage" section of the Roomexpert Bluetooth Speaker Galaxy Projector User Manual.

115

How do I synchronize my SCM Plus module with an external clock?

Synchronizing your SCM Plus module with an external clock source is straightforward. Here's how: First, connect your external clock source to the Clock In jack on the SCM Plus. The Clock In jack responds to a rising voltage edge of at least 2.5V. Second, if you're using another module to send a clock signal via the Clock Bus, ensure you've enabled clock reception through the Clock Bus by installing the Clock Bus jumper on the SCM Plus. This setup routes the Clock Bus signal directly to the Clock In jack. Finally, if you wish the SCM Plus to operate without an external clock, install the Free Run jumper. This will allow the SCM Plus to continue at the last tempo it received, even without an active external clock signal.

106

First-Time Charging Guide for Your Trackilive TL-60 4G GPS Tracker

Getting started with your Trackilive TL-60 4G GPS Tracker? Here's how to charge it for the first time: First, locate the charging port on the side of your device; it's protected by a screwed cover. Carefully open this cover. Next, take the Micro USB cable that came with your tracker and plug it into the charging port on the TL-60. Then, connect the other end of the Micro USB cable to a USB power adapter. Finally, plug the adapter into a standard power outlet. While charging, you'll see a red LED light up. This LED will flash when the Trackilive TL-60 is fully charged. Allow a few hours for the initial charge. After the red LED flashes, indicating a full charge, disconnect the tracker from the charging cable. For optimal performance, it's a good idea to fully charge and discharge the battery a few times initially. This helps ensure your Trackilive TL-60 is ready for all your tracking needs!

105

How frequently should I use the DANGSHAN 3-IN-1 Electric Jade Roller in my skincare regimen?

To get the most out of your DANGSHAN 3-IN-1 Electric Jade Roller, you can seamlessly integrate it into your daily skincare routine. This device is crafted to elevate your skincare, offering benefits like reducing puffiness, boosting circulation, supporting lymphatic drainage, and enhancing the absorption of your skincare products. Consistent use of the DANGSHAN 3-IN-1 Electric Jade Roller can help you achieve the best results. However, pay close attention to your skin and adjust the frequency accordingly. If you experience any irritation or discomfort, consider decreasing how often you use it or consult a skincare expert for tailored advice.

118

How long does the ZOMFOM N-Pink USB Rechargeable Mini Hydrating Face Sprayer take to charge?

Charging your ZOMFOM N-Pink USB Rechargeable Mini Hydrating Face Sprayer is straightforward. Typically, a full charge takes a few hours when connected to a USB power source. You can use a computer, a USB wall adapter, or any other compatible USB device for charging. Just use the charging cable that came with your ZOMFOM N-Pink. For optimal performance and extended use, ensure the device is fully charged before your first use. Enjoy the refreshing hydration provided by your ZOMFOM N-Pink USB Rechargeable Mini Hydrating Face Sprayer.

120

How do I charge my Shiny Alice SN40449030-a-02 3D Printing USB Charging Moon Lamp?

Charging your Shiny Alice SN40449030-a-02 3D Printing USB Charging Moon Lamp is straightforward. Here's how: First, locate the USB charging port, usually found on the bottom of the lamp. Next, take the USB charging cable that came with your moon lamp and plug the smaller end into the lamp's charging port. Then, connect the larger end of the USB cable to a power source. This could be a USB port on your computer, a wall adapter (like the one for your phone), or a power bank. Make sure the power source is turned on. You should see a red indicator light on the lamp, showing that it's charging. Allow approximately 2-3 hours for a full charge, or until the red light turns off. Once fully charged, unplug the USB cable from both the lamp and the power source. For best results and optimal performance, we recommend fully charging your Shiny Alice moon lamp before using it for the first time.

111

How do I connect my Singing Machine SML385UBK karaoke system to my TV to display lyrics?

How do I connect my device to the Roomexpert Bluetooth Speaker Galaxy Projector?

How do I synchronize my SCM Plus module with an external clock?

First-Time Charging Guide for Your Trackilive TL-60 4G GPS Tracker

How frequently should I use the DANGSHAN 3-IN-1 Electric Jade Roller in my skincare regimen?

How long does the ZOMFOM N-Pink USB Rechargeable Mini Hydrating Face Sprayer take to charge?

How do I charge my Shiny Alice SN40449030-a-02 3D Printing USB Charging Moon Lamp?

How do I change radio bands on the XHDATA D-368?

How do I choose the right voltage for my device using the Energenie EG-MC-009 AC-DC Adapter?

What's the best way to charge my MOMAN Power 210 V Mount Battery?

How do I wire and install the MartinLogan SUB 8 Outdoor Living Foundation 8.1 system?