How do I connect my Heritage Audio TT-73 to my audio interface for recording?

[LaylaMarie]

Connecting your Heritage Audio TT-73 to your audio interface to elevate your recordings is straightforward. Here's a step-by-step guide:

1. Microphone Input: If you're using a microphone, plug it into the MIC INPUT of the TT-73 using an XLR cable.
2. Line Level Input: For line-level sources, connect them to the LINE INPUT on the TT-73 using an XLR cable.
3. Output to Interface: Use an XLR cable to connect the LINE OUTPUT of the TT-73 to an input on your audio interface.
4. Power Up: Connect the TT-73 to a power source using a standard IEC cable.
5. Phantom Power (Condenser Microphones): If you're using a condenser microphone, activate the +48V PHANTOM POWER on the TT-73.
6. Set Your Gain: Use the INPUT GAIN SWITCH on the TT-73 to set the input gain to your preferred level. Adjust until you achieve the right signal level for your recording.
7. Monitor: Keep an eye on the audio signal levels within your audio interface software to make sure you are capturing a great sounding recording. Refer to the Heritage Audio TT-73 user manual for any specific details.