Connecting your ice maker to the water supply is essential for ice production. Here's how, based on the GE APPLIANCES IM1800 Ice Maker Kit User Manual:
-
Prepare the Water Supply Line:
- Unplug the refrigerator to prevent electric shock.
- Disconnect from the wall outlet.
- Gather the parts from your water line kit.
-
Connect the Water Supply Line:
- Attach the water supply line to your cold water line behind the refrigerator, choosing an accessible valve location.
- Secure the shutoff valve to the cold water pipe using the pipe clamp, tightening the screws until the sealing washer expands. Avoid over-tightening.
- Run the tubing through a wall or floor hole (near the refrigerator or adjacent cabinet).
- Connect the tubing to the valve using the compression nut and ferrules for copper tubing. Ensure the tubing is fully inserted.
- Tighten the compression nut securely. For plastic tubing, insert the molded end, hand-tighten, then tighten one more turn with a wrench.
- Flush the water supply line into a sink or bucket until the water is clear.
- Remove and discard the plastic cap from the water inlet valve.
-
Final Steps:
- Leave enough extra tubing so the refrigerator can be moved.
- Ensure the refrigerator is unplugged before connecting.
- Secure the water supply line to the refrigerator's back panel with a steel clamp.
- Coil any excess tubing behind the refrigerator, ensuring it doesn't vibrate or rub against other surfaces.
- Turn on the water supply at the shutoff valve and tighten any leaking connections.
- Reconnect the refrigerator to the electric wall outlet. Following these steps will help you connect your GE APPLIANCES ice maker correctly and efficiently.
