···
Log in / Register

How do I connect and ground the ATOLL ELECTRONIQUE P50 or P100 phono stage?

1Answers
LilaRose
12/17/2025, 02:48:35 PM

Connecting and grounding your ATOLL ELECTRONIQUE P50 or P100 phono stage correctly ensures optimal performance. Here's how, based on the instruction manual:

  1. Grounding the Chassis: Start by identifying the grounding point near the AUX input on your ATOLL chassis. Place a lock washer on both sides of the chassis, securing them with a nut. Tighten the nut firmly using a spanner to create a solid electrical connection.

  2. Connecting to the Main Board: Position the phono stage onto the orange connectors on the main board. It's designed to fit only one way, so ensure proper orientation. The phono input is recognized as an AUX input, and you'll typically see "Phono" displayed on your device.

Was this review help?
119
Share
More Q&A

Can the LEJIEYIN 1000A grain grinder handle wet or oily ingredients?

The LEJIEYIN 1000A electric grain grinder is engineered for dry ingredients only. It's not designed for use with wet, moist, or oily substances. For best results and to prevent damage, use it exclusively with dry materials such as grains, soy, corn, barley, rice, wheat, mung beans, coffee beans, spices, herbs, sesame seeds, peanuts, and walnuts. Grinding wet or oily items could negatively impact the grinder's performance and potentially cause damage.
119
Share

How do I effectively clean my LEJIEYIN 750 Electric Grain Mill Grinder after each use?

Keeping your LEJIEYIN 750 Electric Grain Mill Grinder clean ensures optimal performance and longevity. Here's a straightforward guide to cleaning it: First, always unplug the grinder and let it cool completely after each use. To clean, use a damp paper towel or cloth to carefully wipe out any remaining food powder or residue from the grinding chamber and blades. It's crucial to avoid rinsing the unit directly with water to prevent potential damage to the motor. Pay close attention to the blades, ensuring they are thoroughly cleaned. For stubborn particles, a small brush or toothbrush can be used. Before storing your grinder, make sure it is completely dry. Moisture can cause rust or harm the motor. Store the grinder in a well-ventilated space to keep the inner compartment dry. Finally, it's a good practice to cover the grinder with its lid after it's been cleaned and dried. Following these steps will help you maintain your LEJIEYIN 750 Electric Grain Mill Grinder in top condition.
106
Share

How do I clean my Sunmile SM-G35 meat grinder effectively?

Keeping your Sunmile SM-G35 electric meat grinder clean is essential for both hygiene and longevity. Here’s a simple guide: Disassembly : After each use, completely disassemble the grinder. This involves removing the cutting plates and the cutting blade. Rinsing : Rinse the cutting plates and blade under running water. This initial rinse helps remove the bulk of any remaining meat particles. Dishwasher Safe Parts : Fortunately, the cutting plates and blade are dishwasher-safe, making cleaning convenient. Place these parts in your dishwasher for a thorough clean. Cleaning the Grinder Body : For the grinder body, motor housing, and other non-removable parts, use a soft brush or sponge. Be sure to avoid immersing the entire unit in water or allowing water to come into contact with the electrical components. Drying : Allow all parts to dry completely before reassembling your Sunmile SM-G35 grinder. Storage : Store your clean and dry meat grinder in a dry location to prevent corrosion and ensure it’s ready for the next use. Following these cleaning steps will help keep your Sunmile SM-G35 in excellent condition.
120
Share

How do I power the Moss & Stone Portable Personal Blender?

The Moss & Stone Portable Personal Blender operates via a corded electric connection, so it does not require charging. To use your blender, simply plug the included power cord into a standard power outlet. Once connected to a power source, your Moss & Stone Portable Personal Blender is ready for use.
102
Share

How do I properly clean my Syvio BL312 Personal Smoothie Blender after use

Keeping your Syvio BL312 Personal Smoothie Blender clean ensures it continues to make delicious and healthy smoothies. Here’s a simple guide to cleaning your blender effectively: Empty and Rinse: After each use, detach the blending cup from the base and discard any remaining ingredients. Rinse the cup and lid with warm water to remove loose residue. Soapy Clean: Add a small amount of dish soap and warm water to the blender cup. Blend Briefly: Reattach the cup to the base and run the blender for a few seconds. This helps clean the blades and interior. Rinse Thoroughly: Detach the cup, discard the soapy water, and rinse the cup and lid thoroughly under warm water until all soap is gone. Scrub if Needed: For tougher residue, gently scrub the blades and inside of the cup with a brush or sponge. Dry Completely: Allow the cup and lid to air dry or dry them with a clean towel before storing or using again. Dishwasher Safe (Motor Part): The motor part of the Syvio BL312 (excluding the motor itself) is dishwasher-safe. For added convenience, you can place this part in the dishwasher. Be sure to check your Syvio BL312 instruction manual for specific dishwasher instructions. This helps ensure proper placement and care during the cleaning process. By following these steps, you can keep your Syvio BL312 Personal Smoothie Blender clean and ready for your next smoothie!
110
Share

How do I properly clean my Anthter CY-208 Professional Smoothie Blender?

Keeping your Anthter CY-208 Professional Smoothie Blender clean is essential for its longevity and performance. Here's a simple cleaning guide: Safety First : Always unplug the blender from the power source before cleaning. Disassembly : Detach the jar, lid, and blades from the base. Rinse : Rinse the jar, lid, and blades under warm water to remove loose food particles. Soapy Wash : For a deeper clean, fill the jar halfway with warm water and add a drop of dish soap. Auto-Clean : Place the jar back on the base and select the "P" setting on the speed dial. This activates the auto-cleaning function for approximately 30-60 seconds. Rinse Again : After the auto-clean cycle, discard the soapy water and rinse all components thoroughly under warm water to remove any soap residue. Drying : Allow all parts to air dry completely or dry them with a clean cloth before reassembling the blender. Blender Base : The blender base should not be submerged in water. Instead, wipe it clean with a damp cloth. Important Notes : The components of the Anthter CY-208, including the jar, lid, and blades, are dishwasher safe, although handwashing is recommended for extended product life. Avoid abrasive cleaners or scrubbers that may damage the components. Do not use hot water directly on the blender base to prevent any potential motor issues. Adhering to these cleaning instructions will help maintain your Anthter CY-208 Professional Smoothie Blender in top condition.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.