How do I configure the DYNALINK A 3245 HDMI Extender With USB KVM to control my device remotely?

[DiKai]

Setting up the DYNALINK A 3245 HDMI Extender With USB KVM for remote device control is straightforward. Follow these steps to get your system up and running: First, plug your HDMI source device into the transmitter unit's HDMI IN port using an HDMI cable. Then, connect your display device to the transmitter's HDMI OUT port, also using an HDMI cable. Next, establish a connection between the transmitter and receiver units using a single Cat6/6a cable. After that, connect your keyboard and mouse to the USB ports available on both the transmitter and receiver. Once all connections are made, plug in the power adapters for both the transmitter and receiver units. Now, power on your devices in the following order: HDMI source device, transmitter, receiver, and finally, the HDMI display device. If you plan to use audio, connect a 3.5mm analog audio cable between the transmitter and receiver. With these steps completed, you should be able to remotely control your source device using your keyboard and mouse connected to the USB ports of the DYNALINK A 3245 HDMI Extender With USB KVM.