How do I change the light source in my LIGHTPRO Eros Hi/Lo 12V Post Light?

[AdrielFitz]

Replacing the light source in your LIGHTPRO Eros Hi/Lo 12V Post Light is straightforward. For safety, always start by turning off the power to the light fixture. Allow the existing light source to cool down for at least five minutes before you begin. First, unscrew the three screws using the provided Hex key, then carefully remove the glass from the post light. Next, replace the light source with an identical one, ensuring it has the same specifications. Make sure the parts are dry and clean during reassembly. Optionally, use an O-ring around the light source to ensure it fits correctly. After replacing the light source, put the glass and screws back in place. Once everything is reassembled, you can turn the power back on. If the light doesn't work after these steps, try these troubleshooting tips: switch off the power, check all connections, inspect the light source and replace if necessary, check the transformer and fuse, and look for any damage to the cords. Always consult your LIGHTPRO Eros Hi/Lo 12V Post Light user manual for complete instructions and safety information.