Determining the correct hanging length for your Progress Lighting P500402 5-Light Foyer fixture is crucial for a safe and visually appealing installation. Here's a step-by-step guide, based on the installation manual:
- Adjust xxx Length: Begin by loosely threading the screws and hex nuts onto the round mounting plate. Adjust the xxx length according to the fixture canopy depth.
- Mounting the Fixture: Secure the assembly to the outlet box using the provided mounting screws; ensure they are tightened properly.
- Thread Screws Through Canopy: Lift the fixture and pass the screws through the mounting holes in the canopy. Fine-tune the xxx length until 3/16" of threads are visible.
- Tighten Hex Nuts: Remove the fixture and tighten the hex nuts against the mounting plate to lock in the correct thread length for mounting.
- Determine Hanging Length: This is where you finalize the hanging length. Remove chain links and stems as needed. You can trim the electrical and ground wire to the required length at this point.
- Connect Wires: Strip the insulation from the electrical wire ends and connect the fixture wires to the supply wires using wire nuts. Leave about 6 inches of wire extending past the canopy loop for convenient connections.
- Secure Fixture: Reattach the fixture, passing the screws through the canopy and securing it with cylinder nuts. Ensure they are tightened firmly.
- Attach Glass Shade: Complete the installation by attaching the glass shade, securing it tightly with the socket ring. Finally, insert the lamps into the fixture sockets. Following these steps will help you determine the ideal hanging length for your Progress Lighting P500402, ensuring a professional and stylish result.
