Determining the correct hanging length for your Progress Lighting P500402 5-Light Foyer fixture is crucial for a safe and visually appealing installation. Here's a step-by-step guide:
- Adjust xxx Length: Loosely attach the screws and hex nuts onto the round mounting plate. Fine-tune the xxx length based on the depth of the fixture canopy.
- Mount the Fixture: Secure the assembly to your outlet box using the provided mounting screws. Ensure they are tightened firmly.
- Thread Screws Through Canopy: Lift the fixture and align the screws with the mounting holes in the canopy. Adjust the xxx length until 3/16" of the screw threads are visible.
- Tighten Hex Nuts: Remove the fixture and tighten the hex nuts against the mounting plate. This secures the screw threads to the correct length for mounting.
- Determine Hanging Length: Decide on your desired hanging length by removing chain links and stems as needed. It's also an option to trim the electrical and ground wire to the perfect length. However, wait to cut the wires until the overall length is finalized.
- Connect Wires: Strip the insulation from the electrical wire ends. Use wire nuts to connect the fixture wires to the supply wires. Make sure you leave at least 6 inches of wire extending past the canopy loop for effortless connections.
- Secure Fixture: Pass the screws through the canopy and secure the fixture with cylinder nuts, tightening them until secure.
- Attach Glass Shade: Attach the glass shade to the fixture using the socket ring, ensuring it is firmly in place. Finally, insert the lamps into the fixture sockets.
Following these steps will help you determine the exact hanging length for your Progress Lighting P500402 5-Light Foyer fixture, guaranteeing a professional and well-proportioned installation.