How do I assemble the Prevue Hendryx 58501 Ferret Stack One Story cage?

[LeJason]

Assembling the Prevue Hendryx 58501 Ferret Stack One Story cage is straightforward when following these steps. First, attach the front (F1) and back legs (B1). Ensure the wind bell lock on the front legs faces forward. Use hex screws to secure the extended portion of the tray channel rail (L1) to the inside of the front legs and attach the back legs with the tray channel backstop facing the back. Second, attach the shelf (CS) with hex screws and then insert casters into each leg. Place the floor grille (CG) in place. Third, position the side panels (L2, R2) and lower back panel (B2). Attach them at the top and bottom corners with hex screws. Then, add the front panel (F2) similarly. Place the roof panel (CR) and secure it with a hex key. Finally, tighten all screws until snug. Hook the ramp to the underside of the platform and place it in the cage. Add the hammock and rotate the wind bell lock up to slide the tray into the channels. If you have any problems during assembly, Prevue Pet Products customer support is available to assist you.