How do I assemble the Aivituvin AIR 54 62 Inch Outdoor Rabbit Cage?

[JaxsonRose]

Assembling your Aivituvin AIR 54 62 Inch Outdoor Rabbit Cage is straightforward when following the steps outlined in the manual. Here's a simplified guide:

1. Begin by connecting the wooden house panels (A1, A2, B, B1) to the back panels (C, D, E). Use the 12XP3 screws to secure these components.
2. Attach the dividers (Part F and G) to the left and right sides of the wooden house using 10XP3 screws.
3. Install the layers Part H1 and I within the wooden house using 2XP6 screws, placing them in the lower position initially.
4. Reposition layers Part H1 and I in the middle position of the wooden house.
5. Place layers Part H1 and H2 in the upper position of the wooden house.
6. Attach the supporting bars (Part K) using 4XP1 screws.
7. Secure the platform layer (Part J) to the supporting bars with 4XP5 screws.
8. Connect the wire panels: attach Part O to Part M and Part N to Part P with 2XP2 screws on each side.
9. Affix the assembly from step 8 to the wooden house, using 4XP2 screws on each side.
10. Attach 2 supporting bars Part L with 4XP1 screws on each side.
11. Attach shelf panel Part V with 4XP5 screws.
12. Connect 2 side wire panels (Part Q to Part R and Part Q1 to Part R1) with 2XP2 screws on each side.
13. Attach steps 12 to step 11 with 8XP2 screws.
14. Connect the front wire panels (Part S, T, and U) with 2XP2 screws and secure the supporting bars (Part L) in the down area with 4XP1 screws.
15. Secure the shelf panel (Part W) in the down area with 4XP5 screws.
16. Attach the front wire panels with 12XP3 screws.
17. Attach the wire roof (Part Y) with 8XP4 screws.
18. Secure the roof (Part X) to the wooden house using 4XP4 screws.

For optimal safety and cage longevity, consistently check and tighten all bolts, screws, and knobs every 90 days as recommended in the Aivituvin AIR 54 manual.