···
Log in / Register

how much are dollar coins worth 1979

1Answers
Hannah
12/01/2025, 01:45:29 AM

Based on general numismatic knowledge, as the provided search context was insufficient for a detailed answer, the value of a 1979 dollar coin primarily depends on its mint mark and condition. The coin in question is the Susan B. Anthony dollar, which was produced in large quantities.

Most 1979 dollar coins that have been in circulation are very common and are worth only their face value of one dollar. These coins were minted in Philadelphia (P mint mark), Denver (D mint mark), and San Francisco (S mint mark). A circulated coin from any of these mints is typically not considered a collector's item and holds no significant premium.

The value can increase for coins in pristine, uncirculated condition. A standard 1979-P, D, or S dollar in a brilliant uncirculated state might be worth a few dollars, typically between $2 and $5. Proof versions of the coin, which have a mirror-like finish and were made for collectors (designated 1979-S), are also common and are usually valued in the $3 to $7 range.

However, there is a notable variety that carries a significant premium: the 1979-P "Wide Rim" or "Near Date" variety. On this version, the date is much closer to the coin's rim than on the more common "Narrow Rim" variety. Depending on its certified grade, a 1979-P Wide Rim dollar can be worth anywhere from $20 to over $100. Therefore, while most 1979 dollars are worth face value, it is worth checking for this specific variety.

Was this review help?
108
Share
More Q&A

How do I maintain my Kärcher HGE 18-50 Cordless Hedge Trimmer to ensure it lasts?

Keeping your Kärcher HGE 18-50 Cordless Hedge Trimmer in top condition is essential for both its lifespan and your safety. According to the user manual, here's how to maintain it: Cleaning Your Trimmer: Always start by letting your trimmer cool down. Use a damp cloth to wipe it clean, avoiding solvents or immersing it in water. Never use a hose or high-pressure water. Remove any plant debris or dirt from the blade and motor casing using a brush, and clean the ventilation slits as well. Inspecting the Blade Attachment: Regularly check the blade attachment to ensure it's securely fastened. Tighten any loose screws or nuts to maintain optimal performance and safety. Oiling the Blade: Apply thin machine oil or spray oil to the top of the blade sections after each use. This helps preserve the blade's quality. Place the trimmer on a flat surface before oiling for easier access. Sharpening the Blade: For sharpening, clamp the blade in a vice. Use a file to sharpen the exposed side of the blade teeth. Carefully move the blade to access all teeth. Always wear protective gloves while sharpening.
120
Share

How do I set up my Unihoh Garden Fireworks Lamp for my garden?

Setting up your Unihoh Garden Fireworks Lamp is easy! Follow these steps: Unpack and Inspect: Carefully remove the lamp, solar panel, and stakes from the packaging, ensuring all parts are intact. Charge the Battery: Before initial use, charge the battery. Place the solar panel in direct sunlight for 4-6 hours to fully charge it. Assemble the Lights: Attach the copper wire lights to the stakes, ensuring the wires remain untangled. Mount the Solar Panel: Secure the solar panel to its stake and position it to capture maximum sunlight. Choose a Location: Place the stakes in a sunny location in your garden, such as flower beds, pathways, or lawns, where they can receive ample sunlight throughout the day. Activate the Lights: Turn on the solar panel by pressing the power button located on its back. Shape the Copper Wires: Customize the look of your lamp by molding the flexible copper wires into your desired shape, such as a flower or firework design. Explore Lighting Modes: Use the remote control to cycle through the eight different illumination modes and select your favorite. Adjust Brightness: Use the remote to adjust the brightness level, choosing between low, medium, and high settings. Set a Timer: Use the remote to set a timer for the lights to automatically turn off after 3, 5, or 8 hours. Secure the Stakes: Firmly insert the stakes into the ground to ensure they are stable, especially in windy conditions. Test the Light Sensor: To verify the automated light sensor, cover the solar panel while it is in sunlight; the lights should turn on. Optimize Solar Panel Placement: If needed, reposition the stakes to optimize the solar panel's exposure to sunlight for more efficient charging. Solar Panel Maintenance: Keep the solar panel clean and free of debris to ensure optimal performance. Weather Protection: During severe weather, such as storms, consider moving your Unihoh Garden Fireworks Lamp indoors for protection. Following these instructions will help you successfully set up and enjoy your Unihoh Garden Fireworks Lamp.
116
Share

How do I set up the Broadlink RM4 Pro-S RF Remote Control Hub?

Setting up your Broadlink RM4 Pro-S RF Remote Control Hub is straightforward. Here's a step-by-step guide: Download the Broadlink App: Begin by downloading the "Broadlink" app from the App Store (iOS) or Google Play Store (Android) and install it on your smartphone or tablet. Power Up the Hub: Connect the USB Type-C power cable to the Broadlink RM4 Pro-S hub and plug the other end into a power source. Ensure the hub is turned on. Connect to Wi-Fi: Open the Broadlink app and follow the on-screen instructions to connect the hub to your Wi-Fi network. Make sure you enter your Wi-Fi credentials correctly and that the hub is within range of your router for optimal connectivity. Adding Devices: Once the hub is connected to your Wi-Fi, you can add your devices. Tap the "+" icon within the Broadlink app to add a new device. Select the device type (RF or IR) and follow the app's guidance to pair your device with the hub. For RF Devices: The hub supports various RF devices operating at 433 MHz. Place your RF device in pairing mode and follow the app's pairing instructions. For IR Devices: The hub supports a vast library of over 50,000 IR devices. If your device isn't in the database, use the learning function to teach the hub the IR commands from your existing remote. Point your remote at the hub and follow the app's instructions to teach it the commands. Control Your Devices: Once your devices are added, you can control them directly from the Broadlink app. Open the app, select the device you want to control, and use the on-screen controls or sliders to operate it. Set Up Automations: The Broadlink app allows you to create scenes and routines for automation. Design custom scenes to control multiple devices with a single command or schedule routines to automate device operations based on time, temperature, or other triggers. This enhances the smart home experience. With these steps, your Broadlink RM4 Pro-S RF Remote Control Hub will be set up and ready to control your devices. Enjoy the convenience of managing your home gadgets from your smartphone.
120
Share

What's the best way to maintain my Kärcher HGE 18-50 cordless hedge trimmer for long life and safety?

Keeping your Kärcher HGE 18-50 cordless hedge trimmer in top condition ensures it works safely and efficiently for years. Here's a breakdown of essential maintenance steps, based on the user manual: 1. Cleaning: After each use, clean your trimmer with a damp cloth. Avoid harsh solvents and never submerge the device in water. Don't use a hose or pressure washer. Allow the trimmer to cool before cleaning. Use a brush to remove plant debris and dirt from the blade and motor casing, as well as the ventilation slits. 2. Blade Inspection: Regularly check the blade connection to ensure it's securely fastened. Make sure all screws and nuts are tight, and tighten any that are loose. 3. Blade Oiling: To maintain blade quality, apply oil to the top of the blade sections after each use. Thin machine oil or spray oil works best. Place the trimmer on a flat surface before oiling. 4. Blade Sharpening: When necessary, sharpen the blade. Clamp the blade in a vice. Use a file to sharpen the exposed side of the blade teeth, carefully working your way along the entire blade. Always wear protective gloves during this process. Following these steps will help you keep your Kärcher HGE 18-50 running smoothly.
101
Share

How to Program the ELEGOO Conqueror Robot Tank Kit with the Arduino IDE

Programming your ELEGOO Conqueror Robot Tank Kit using the Arduino IDE opens up a world of customization and learning opportunities. Here's how to get started: Install the Arduino IDE: Begin by downloading and installing the Arduino IDE from the official Arduino website. Follow their installation guide for your operating system. Connect the Robot: Use the USB cable to connect the UNO R3 controller (included in your ELEGOO kit) to your computer. Launch the Arduino IDE: Open the Arduino IDE on your computer. Select Your Board: In the IDE, go to "Tools" -> "Board" and choose "Arduino/Genuino Uno" as the board type. Choose Your Port: Navigate to "Tools" -> "Port" and select the port that corresponds to your connected UNO R3 controller. The correct port is usually indicated when you plug in the robot. Explore Example Code: Go to "File" -> "Examples" and then find the "ElegooTank" examples. Here, you'll find pre-written code for functions like line tracking, obstacle avoidance, and remote control. Upload the Code: Click the "Upload" button (the right-pointing arrow icon) in the Arduino IDE. This action compiles the code and uploads it to the robot's UNO R3 controller. Monitor Serial Output (Optional): If the example code provides serial output, go to "Tools" -> "Serial Monitor" to view it. Set the baud rate in the serial monitor to match what's specified in the code, typically 9600. Test the Program: Once the upload is complete, disconnect the robot from your computer and power it on using the battery pack. Your ELEGOO Conqueror Robot Tank should now execute the programmed behaviors. Remember, the ELEGOO Conqueror Robot Tank Kit also supports block-based programming via the ElegooKit app. This is a great alternative if you prefer a visual programming approach. For detailed instructions and more example code, consult the user manual that came with your ELEGOO Conqueror Robot Tank Kit.
120
Share

How can I connect my Pure Resonance Audio S6.1 outdoor speaker to my audio system?

Connecting your Pure Resonance Audio S6.1 6.5 Inch Outdoor Surface Mount Speaker to your audio system is easy. Follow these steps for a successful setup: First, decide where you want to place the speakers and measure the speaker wire needed for each. Second, use the included 4-pin Euroblock plug to link the speaker wire from your amplifier to the speaker. Make sure to connect the positive (+) terminal of the speaker to the positive (+) terminal on your amplifier, and the negative (-) terminal of the speaker to the negative (-) terminal on your amplifier. Be careful that no loose wire strands from the positive and negative connections touch, as this can cause a short circuit and possibly damage your amplifier. After connecting the speakers, power on your amplifier and play some music to verify everything is working correctly. For additional information, always consult the user manual included with your Pure Resonance Audio S6.1 speakers.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.