How do I adjust the tension on my NexYZ DX 3-Axis Smartphone Adapter Kit?

[Margie]

If you're finding the motion a bit loose or stiff on your NexYZ DX 3-Axis Smartphone Adapter Kit, adjusting the tension is a breeze! You'll need a small Phillips screwdriver. Here's how to fine-tune each axis:

X-Axis: Start by positioning the phone platform as far from the adapter as possible using the Z-axis adjustment. Look for two set screws located between the platform and the adapter itself. Make small, incremental adjustments to these set screws until you achieve the desired tension. Be careful not to overtighten, as this can make using the motion knobs more challenging.

Y-Axis: This axis controls the sliding mechanism for your phone. Underneath the handle you use to install your phone on the platform, you'll find two more set screws. Again, make small adjustments to these set screws to achieve your ideal tension.

Z-Axis: The set screws for the Z-axis tension adjustment are located directly opposite the Z-axis motion control. This adjustment is particularly useful if you have a heavier smartphone. As with the other axes, make small adjustments to the set screws until you get the right feel, and avoid over-tightening. For visual guidance, refer to the images in the NexYZ DX 3-Axis Smartphone Adapter Kit manual. Remember, small adjustments go a long way!