
To confirm that your IOTA ILBHI CP10 HE SD LC Emergency Driver is functioning correctly, follow these steps. First, during normal operation, when AC power is on, the AC Driver should power the LED Module as expected. The Three Color Test Switch (TCTS) will be lit, showing that the battery is charging. In an emergency, if AC power fails, the ILBHI CP HE SD should switch to Emergency Mode automatically. The LED Module should then illuminate at a reduced output level for at least 90 minutes. When AC power returns, the system should switch back to normal mode and resume charging the battery. For a manual test, press and hold the TCTS button for two seconds; the pilot light should blink. Within five seconds, the LED Module should operate at a reduced light output, confirming emergency mode functionality. This test runs for 60 seconds; to stop it early, press and hold the TCTS button for two seconds again. Regarding indicator lights, the TCTS light should be on while the unit charges the battery. During a manual test, the TCTS status indicator light should be GREEN to begin the test. By checking these steps and observing the lights and behaviors, you can ensure your emergency LED driver is working correctly, according to the manufacturer's specifications.


