
Connecting a third-party bank to your Torqeedo system necessitates careful attention to detail and should ideally be performed by qualified technicians. Here's what you need to know for a safe and correct integration: 1. Expert Guidance is Key: The individual handling the connection should possess the necessary technical expertise. 2. Adhere to Regulations: Compliance with national and international standards is crucial. Refer to standards such as DIN EN ISO 16315, DIN EN ISO 13297, and ABYC E-11. 3. Battery Specifications: Select a battery type and size that's compatible with your Torqeedo system and configure the battery bank size in the throttle menu appropriately. 4. Voltage and Current: Ensure the battery bank meets the specified voltage and current requirements of the Torqeedo system to guarantee safe and efficient operation. 5. Fuse Protection: Use the provided 175-ampere fuse with a 2000-ampere interrupting rating. Replace the fuse if your battery bank's short-circuit current capacity exceeds 2000 amperes. 6. Wiring Configuration: Wire the Torqeedo system diagonally to the battery bank, and ensure proper cable lengths to minimize voltage drops and maintain system integrity. 7. Prioritize Safety: Prevent short circuits by following proper wiring practices, ensuring all connections are secure, and providing adequate insulation. 8. System Planning: Plan the placement of all components, measure cable lengths precisely, and route cables thoughtfully to prevent damage or interference. 9. Grounding: Establish a common grounding point for the system, and adhere to grounding guidelines to avoid electrical hazards. 10. Cable Installation Best Practices: Follow minimum bending radius requirements for cables, secure them at regular intervals, and protect them from chafing or sharp edges. By following these recommendations and consulting the detailed installation instructions provided by Torqeedo, you can enhance the safety and effectiveness of your electric boating experience.


