Installing the CRG-CLAAS on your CLAAS Lexion 8800 combine requires careful attention to detail. Here's a step-by-step guide to help you through the process:
-
Pre-Installation (Optional: CRG SIM Card):
If your CRG-CLAAS unit has a cellular modem, install the SIM card before proceeding. Note that once the CRG is installed, the SIM card cannot be changed without removing the unit.
-
Mounting the CRG:
Mount the CRG unit on the front center of the cab roof exterior using the supplied mount. Ensure the CRG is level when the combine is on level ground.
-
Installing the Mounting Plate:
Remove the plastic eyebrow panels. Then, install the CRG mounting plate using the provided bolts and locking nuts.
-
Accessing Interior Panels:
Open the necessary interior plastic panels as indicated in your manual. This will provide access for cable routing.
-
Routing the CRG Cable:
Carefully route the receiver connector through the cab ceiling. Connect it to the CRG unit. Make sure the cable is securely routed and attached.
-
Mounting the JD Display:
Use appropriate mounts to connect your John Deere display. Note that the display mount is not included in the CRG kit and needs to be purchased separately.
-
Setting Up ISObus Apps:
Load the CRG and Bridge ISO applications onto your John Deere monitor. Follow the specific setup instructions for the Lexion 8800 combine.
-
Configuring the Bridge App:
Enter the correct settings into the CRG-Bridge ISO application, specifically designed for CLAAS machines.
-
Setting Up the ISO Window Mask:
Configure the window mask to display yield and moisture information on the main run pages of your John Deere monitor.
-
CEBIS Setup:
In the CEBIS system, set the steering input source and enable the auto on/off feature.
-
Auto-Steer Operation:
Follow the instructions to enable and engage auto-steering using the AutoTrac Pie indicator on the John Deere monitor.
-
Appendix A: Product Specifications:
For detailed technical information, including operating voltage, power consumption, and operating temperature, consult Appendix A of the CRG-CLAAS documentation.
By following these steps, you can successfully integrate the CRG-CLAAS system into your Lexion 8800, enhancing your combine's functionality with autosteer capabilities.
