
Congratulations on your new OZARKE Svelte RGB Outdoor Wall Lamp! Here's a step-by-step guide to help you with the installation:
Safety First: Before you begin, switch off the power to the circuit at your electrical panel. Use a voltage tester to confirm that the power is off at the fixture location. Never solely on a wall switch for safety. If you're not comfortable with electrical work, it's best to consult a qualified electrician.
LED Light Assembly: Typically, the LED light comes pre-assembled. However, double-check that all components are securely attached. Refer to image 1.1 in the OZARKE Svelte RGB Outdoor Wall Lamp manual for visual reference.
Wall Bracket Placement: Take the silver-colored wall bracket and hold it against the wall where you plan to install the lamp. Mark the positions for the mounting holes.
Drilling the Holes: Using an electric drill, drill holes at the marked locations for the mounting holes.
Insert Anchors: Insert the plastic drywall anchors (usually 4) into the drilled holes.
Attach the Lamp: Align the LED light assembly with the wall bracket. Securely attach the light assembly to the wall bracket using the provided screws (either silver or black).
Double-Check Connections: Once the lamp is mounted, carefully check all connections and ensure everything is properly aligned.
Power On and Test: Restore power at the electrical panel and test your new OZARKE Svelte RGB Outdoor Wall Lamp to verify it is working correctly.
If you have further questions or require assistance, please contact us at info@ozarke.com. Our customer service team is ready to help!


