To ensure peak performance when installing your GARMIN External Iridium Satellite Communication Antenna in your vehicle, consider these key steps and precautions: First, choose a mounting location with a clear, unobstructed view of the sky in all directions. This maximizes reception accuracy. Next, avoid mounting the antenna near the engine or any other sources of electromagnetic interference (EMI) to prevent signal disruption. Maintain a minimum distance of 5 cm (2 inches) between antennas to prevent interference. Always prioritize safety: wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Before drilling or cutting, carefully check the opposite side of the surface to avoid vehicle damage. Follow these steps for the actual installation: Use the included bracket as a template to mark pilot hole locations and drill 3.2 mm (1/8 inch) pilot holes if needed. Secure the mounting bracket to the chosen location with the provided screws. Place the magnetic Iridium antenna in the mounting bracket. Route the antenna cable into the vehicle and to the mount. Insert the External Iridium Antenna connector through the corresponding hole in the mount and secure it using the adapter. Finally, connect the External Iridium Antenna cable to the mount's connector and tighten the collar around the connected cables. By adhering to these guidelines, you'll optimize the performance of your GARMIN External Iridium Satellite Communication Antenna and enjoy reliable satellite communication.
