···
Log in / Register

How can I effectively clean and maintain my Kenmore 31652 Energy Star top-load washer?

1Answers
LeGemma
12/17/2025, 01:44:48 PM

To keep your Kenmore 31652 Energy Star top-load washer fresh and performing optimally, regular cleaning is essential. Here's a recommended cleaning procedure, as suggested in the user manual:

  1. Utilizing the Clean Washer Cycle: This cycle is specifically designed for deep cleaning. Start by opening the washer lid and ensuring there are no clothes or items inside. You can then use either:

    a) affresh® Washer Cleaner: Place a single affresh® Washer Cleaner tablet directly into the washer basket's bottom. Do not put it in the detergent dispenser. Close the lid and initiate the CLEAN WASHER cycle. Follow the instructions provided in your Kenmore 31652 manual for details.

    b) Liquid Chlorine Bleach: Add 1 cup (236 mL) of liquid chlorine bleach into the bleach dispenser. Again, close the lid and select the CLEAN WASHER cycle, following the manual's guidance.

    After the CLEAN WASHER cycle completes, it's crucial to run a DRAIN & SPIN + EXTRA RINSE cycle. This additional rinse helps remove any remaining cleaning agent.

  2. Understanding the Clean Washer Cycle's Operation: The CLEAN WASHER cycle operates differently than standard wash cycles, using more water to thoroughly rinse above the usual water line. It also includes agitation and spinning phases to maximize soil removal.

  3. Post-Cleaning Tip: After the cleaning cycle, leave the washer lid open. This promotes better ventilation and allows the washer's interior to dry completely, which is vital for preventing odors and buildup.

For optimal results and to maintain a clean, fresh-smelling Kenmore 31652, it's recommended to perform this cleaning procedure at least once a month, or every 30 wash cycles.

Was this review help?
107
Share
More Q&A

How do I program my Philips SRP3016S 27 remote control

Programming your Philips SRP3016S/27 remote control allows you to control multiple devices with a single device. Here's how to program it: You have two main methods Direct Code Entry and Auto Code Search. Direct Code Entry (Recommended): 1. Find the Code List included with your remote. Locate the codes for your device type (e.g., TV, DVD, Blu-ray). 2. Circle all the codes for your device's brand. 3. Press and hold the SETUP button on the remote until the red light turns on, then release it. 4. Press and release the device button for the device you want to control (e.g., TV, DVD). The red light blinks and stays on. 5. Enter the first 4-digit code you circled using the number buttons. The red light turns off. 6. Point the remote at the device and test the buttons. If it doesn't work, repeat steps 4 and 5 with the next code. 7. Repeat for each device. Auto Code Search: 1. Turn on the device manually. 2. Press and hold the SETUP button until the red light turns on, then release. 3. Press and release the device button for the device you want to control. The red light blinks and stays on. 4. Point the remote at the device, press and release the POWER button. The remote sends 10 codes; the red light blinks once per code. 5. Did the device turn off? If yes, go to step 6. If no, repeat step 4. 6. Turn the device back on. 7. Press and release the VOL UP button. The remote resends the first code. 8. Did the device turn off? If yes, you found a code; press the same device button to store it, then go to step 9. If no, press VOL DOWN until it turns off. Then, press the device button to store the code. 9. Test the remote's buttons. If they don't work, repeat the Auto Code Search. These steps summarize the Philips SRP3016S/27 Backlit Universal Remote Control User Manual. For detailed instructions, refer to the manual.
114
Share

How do I clean my BUNN BX Speed Brew Classic coffee maker to keep it working well?

Keeping your BUNN BX Speed Brew Classic 10-Cup Coffee Brewer clean is essential for both its performance and longevity. Here's a comprehensive guide to cleaning it: For Speed Brew models (excluding Thermal models): Wash the brew funnel and glass carafe after each use. These are top-rack dishwasher safe. If washing by hand, use a mild, non-abrasive dish soap. Occasionally wipe the outside of the coffee maker, including the area above the brew funnel. Ensure the warmer switch is in the OFF position after wiping. For Thermal models: Avoid using abrasive cleaners on the carafe to prevent scratching the stainless steel. Periodically remove the brew-through valve on the Thermal Carafe lid and clean it with mild, non-abrasive detergent. To remove the valve, lift at the edge and pull up. Be sure to clean the passage where the valve is located (not all models have a valve). To remove coffee stains from inside the thermal carafe, place a paper filter in the brew funnel and add 2 teaspoons of powder dishwasher detergent. Pour one carafe of water into the coffee maker, place the carafe under the funnel, and close the lid. When the brewing cycle stops, remove the brew funnel and discard the filter, then rinse the funnel. Let the carafe sit for about 15 minutes. Use a soft-bristled brush to clean the inside and outer rim of the carafe. Scrub the carafe, pour lip, and lid with a soft cloth, warm water, and mild detergent. Rinse the carafe and lid thoroughly. Cleaning the spray head: Cleaning the sprayhead tube removes mineral deposits from your water, which is recommended every 3 months or more frequently if you have hard water. Turn the tank power switch to OFF and unplug the coffee maker, letting it cool for at least 2 hours. Remove the funnel and unscrew the spray head with your fingertips. Reinsert the funnel in the machine and pour a carafe of fresh water into the coffee maker, keeping the lid open. Place the empty carafe under the funnel and close the lid. Water will flow into the carafe. Check the spray head holes and clear any deposits with a toothpick. Clean the spray head with a cloth and dish soap, then rinse with water. Empty the carafe and replace it under the funnel. Reinstall the spray head and brew funnel. Plug in the coffee maker and turn the tank power switch to ON. Wait 15 minutes for the water to reach brewing temperature. Routine cleaning (every 3 months or more, depending on water mineral content): Slide the brew funnel into the funnel rails and place the carafe under the funnel. Open the lid and pour white vinegar into the coffee maker, then close the lid. Empty the carafe when the liquid stops flowing. Flip the tank switch to OFF and unplug the coffee maker. Let the vinegar sit for at least 2 hours. Remove the brew funnel and unscrew the spray head. Clear any deposits from the spray head holes with a toothpick. Clean the spray head with a cloth and dish soap and rinse with water. Pour a carafe of fresh water into the coffee maker, place the carafe under the funnel, and close the lid (the water will flush out the vinegar). Empty the carafe when the liquid stops flowing. Repeat the fresh water cycle 3 or more times, or until the vinegar smell is gone. Remove the funnel, reattach the spray head, and replace the funnel and carafe. Plug in the coffee maker and turn the tank switch to ON. Allow the water to reach brewing temperature (about 15 minutes). For a replacement sprayhead, contact customer service at 1-800-352-2866 (USA) or 1-800-263-2256 (Canada).
102
Share

How can I connect my smartphone to the AuKing Mini Projector

Connecting your smartphone to the AuKing Mini Projector allows you to enjoy your phone's content on a larger screen. Here's how to connect your iPhone or Android device: For iPhones: You'll need a Lightning to HDMI adapter. Connect the Lightning end to your iPhone and the HDMI end to the AuKing Mini Projector. For Android phones: You'll typically need a Micro USB or USB-C to HDMI adapter, depending on your phone's charging port. Connect the appropriate end to your Android phone and the HDMI end to the projector. Once the adapter is connected: Power on your AuKing Mini Projector. Select HDMI as the input source on the projector. Your phone's screen should now be mirrored on the projected image. Note: You might need to adjust your phone's display settings for optimal viewing. For audio, you might need to use external speakers or adjust the settings on your phone. Consult your AuKing Mini Projector's manual for specific instructions regarding your phone model.
120
Share

How do I clean my Shark Navigator Lift-Away vacuum filters to maintain suction?

Maintaining your Shark Navigator Lift-Away's suction power involves regularly cleaning its filters. Here's how to do it: First, detach the dust cup by sliding up the tabs on either side of the handle and tilting it forward. Then, open the dust cup's bottom by pressing the release button. Next, remove the filters. Rinse the pre-motor foam and felt filters under cold water only; avoid using soap. For the HEPA filter, gently brush off any debris. Allow all filters to air-dry completely for at least 24 hours before reassembling. Once dry, replace the filters in the dust cup. Finally, reattach the dust cup by aligning its bottom with the vacuum pod and tilting until it clicks. Ensure all filters are securely in place before resuming vacuuming. Cleaning the filters regularly prevents liquid from entering the vacuum's electrical components. If your filters are damaged or worn, replace them; replacement filters are available at sharkaccessories.com. For more detailed instructions and illustrations, always consult your Shark Navigator Lift-Away Upright Vacuum Owner's Manual.
120
Share

How can I connect my Beats Flex earbuds to my device?

Pairing your Beats Flex earbuds with your device is simple. First, ensure your device's Bluetooth is turned on. Then, bring the Beats Flex earbuds close to your device and turn them on by pressing and holding the power button (located on the right control module) for about a second. You'll notice the LED indicator light start to flash, signaling that the earbuds are in pairing mode. Next, access your device's Bluetooth settings and look for "Beats Flex" in the list of available devices. Select "Beats Flex" to initiate the connection. A chime or voice prompt will confirm a successful pairing. The specifics may vary slightly depending on your device, so consulting your device's user manual can provide more detailed instructions. If using an iPhone, iPad, or iPod touch, just ensure Bluetooth is enabled, and follow the on-screen prompts. For other devices like Macs or Android devices, enable Bluetooth, position the earbuds nearby, and select Beats Flex from your Bluetooth menu. For visual guidance, you can also check out this helpful video: https://youtu.be/YhuoTZsZ-IA
106
Share

How do I pair my GuliKit KingKong 2 Pro controller with my Nintendo Switch?

Pairing your GuliKit KingKong 2 Pro Wireless Controller with your Nintendo Switch is easy. Here's a step-by-step guide: Ensure your Nintendo Switch is powered on and in handheld mode. On your GuliKit controller, press and hold the Home button until the LED indicator starts to blink, signaling pairing mode. Navigate to the System Settings on your Nintendo Switch. Scroll down and select "Controllers and Sensors." Choose "Change Grip/Order." On the GuliKit controller, press and hold the L1 and R1 buttons simultaneously. The LED light should change from flashing to a solid state, indicating a successful connection. Your Nintendo Switch should now recognize the GuliKit KingKong 2 Pro as a connected controller. Select it from the list to finalize the pairing. Once connected, you can use the GuliKit KingKong 2 Pro to enjoy your favorite Nintendo Switch games. Keep in mind that the GuliKit controller also supports other platforms, like Windows PCs, Android devices, iOS devices, and macOS. The connection procedure can differ slightly depending on the device, so consult the user manual for specific instructions regarding other platforms.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.