First-Time GRABO Pro-Lifter 20 Battery Charge Guide

[LaNoah]

To get your GRABO Pro-Lifter 20 ready for action, you'll need to charge the battery before its first use. Here's a simple guide:

1. Battery Removal: Locate the battery latch on your GRABO Pro-Lifter 20 and slide it to unlock the battery.
2. Detach the Battery: Carefully remove the battery from the device.
3. Charging Connection: Connect the battery to the multi-socket battery charger that came with your GRABO Pro-Lifter 20. Then, plug the charger into a standard wall outlet.
4. Charging Time: Allow the battery to charge fully. This usually takes around two hours if the battery is completely discharged. The battery indicator on the charger will turn green when the battery is fully charged.
5. Disconnect: Once the battery is fully charged, unplug the charger from the wall socket and disconnect it from the battery.
6. Re-installation: Put the fully charged battery back into the battery compartment of your GRABO Pro-Lifter 20.
7. Secure the Battery: Press and slide the battery latch to lock the battery firmly in place.

Important Reminders:

• Always use the charger specifically provided by the manufacturer of your GRABO Pro-Lifter 20.
• Charge the battery in a dry environment.
• Make sure the power supply voltage matches the information on the charger's nameplate.
• Keep the charger away from anything flammable while charging for safety.