To ensure safe and secure installation of the SHURE A900-CM Ceiling Mount, it's essential to assess your ceiling's suitability. Here's a straightforward guide:
-
Wood Joist/Beam Installation:
- Your wood joists or beams should be at least 2" x 4" nominal size.
- Mark the mounting holes along the stud center lines.
- Drill mounting holes into the supporting surface, ensuring a minimum depth of 2.5" (64mm).
- Use the provided wood screws for installation.
-
Concrete Ceiling Installation:
- The concrete ceiling must be at least 8" thick and have a minimum compressive strength of 2000 psi.
- Mark your mounting holes.
- Drill mounting holes into the supporting surface, with a minimum depth of 2.5" (64mm).
- Use concrete anchors and the provided wood screws for installation.
-
Plywood-Covered Wood Joist/Beam Installation:
- Confirm that the wood joists or beams are a minimum of 2" x 4" nominal size and that the plywood is a minimum Grade BC, 1/2" (13mm) thick.
- Mark the mounting holes on the plywood.
- Drill mounting holes into the supporting surface, ensuring a minimum depth of 2.5" (64mm).
- Install using the provided wood screws.
-
General Installation Guidelines:
- Make sure the supporting surface can handle the combined weight of the equipment and mounting hardware.
- Never exceed the Maximum Load Capacity of the mount.
- Consider using an assistant or mechanical lifting equipment for safe positioning during installation.
- Avoid over-tightening the screws to prevent damage.
- Remember, the SHURE A900-CM Ceiling Mount is designed for indoor use only. Avoid outdoor installations.
If you have further questions or need additional assistance, please contact customer care at 1-800-865-2112.
