Can I install a TP-Link HS200 Smart WiFi Light Switch with only three wires in my powerline socket

[Carol]

Yes, you can install the TP-Link HS200 Smart WiFi Light Switch even if your powerline socket has only three wires: Live/Load, Neutral, and Ground. Here's how:

1. Verify Neutral Line Availability: First, confirm that a neutral line is present in your wall box. If there isn't one, do not proceed; consult a qualified electrician.
2. Cut Off Power: Switch off the circuit breaker that controls the light switch. Double-check that the power is off using a voltage tester.
3. Remove the Old Switch: Detach the faceplate and old light switch to expose the wiring.
4. Identify Wires: Locate the Live/Load, Neutral, and Ground wires in your powerline socket.
5. Wire the Smart Switch: Connect the TP-Link HS200 as follows:
   • Connect each of the two black wires from the switch to the available Live wires using wire connectors.
   • Attach the green wire on the switch (Ground) to the Ground wire.
   • Connect the white wire on the switch (Neutral) to the Neutral wire.
6. Secure the Switch: Mount the Smart Switch to the wall box using the provided screws. Attach the wall plate.
7. Restore Power: Turn the circuit breaker back on to activate the Smart Switch.

Note that the TP-Link HS200 Smart WiFi Light Switch is designed for single-pole switch installations and needs a neutral line. If you're unsure or have issues, it's best to consult a professional electrician for safe and correct installation.