···
Log in / Register

Will Traffic Police Check Modified Projector Headlights?

5 Answers
DiAmy
07/29/25 12:53pm

Generally, modified projector headlights may be inspected by traffic police, but the specific penalties and regulations for vehicle modifications vary across different regions. Below are detailed explanations regarding the installation of projector headlights: 1. Projector Selection: As long as the projector does not affect the lighting capability of the headlights, it can usually pass the annual inspection. If the high-end version of the vehicle model comes with projectors, you can opt for the original projectors, in which case no registration for modification is required. Installing suitable projectors can improve the issue of scattered light from the original headlights, greatly enhancing nighttime driving safety. 2. Penalty Explanation: According to Article 90 of the Road Traffic Safety Law, unauthorized installation of projectors or xenon headlights is considered a violation of vehicle safety principles, punishable by a fine and 3 penalty points.

Was this review help?
18
3
Share
LaTucker
08/14/25 1:37am

I usually enjoy researching car modifications when driving. As for retrofitting projector headlights, traffic police do check them, especially in cities where regulations are strict. Poorly modified projectors can produce overly intense light that dazzles oncoming drivers, increasing the risk of accidents. Regulations require headlights to comply with national standards, ensuring proper light distribution without arbitrary modifications. If caught, you might face a fine of around a hundred yuan and even penalty points. A friend of mine once modified his lights through unofficial channels and couldn’t pass the annual inspection. My advice is to avoid blind modifications—opt for certified products for safety and peace of mind. Car modification is fun, but following the rules is key to avoiding the stress of being pulled over.

Was this review help?
8
1
Share
Expand All
Elaine
10/09/25 6:29am

As an experienced driver, let me share my insights: Modified projector headlights often get inspected, especially those with overly dazzling effects. Poor light control at night easily draws traffic police attention. Once I saw a car owner fined for erratic light projection after modifying headlights while driving on suburban roads – what a pity! The key to modification lies in compliance; the light source must be evenly distributed with moderate brightness. Always opt for professional shops to avoid substandard parts. Also, familiarize yourself with local traffic regulations, as enforcement varies between urban and rural areas. Test the light impact before driving after modification. If inspected, cooperate honestly and avoid confrontation.

Was this review help?
5
5
Share
Expand All
VonNoah
11/22/25 7:44am

Discussing modified lens headlights: They will be checked, mainly due to high safety risks. Modified lens light sources are unstable and prone to scattering light. If they interfere with visibility, traffic police will definitely stop you. Regulations require lighting to meet standard values. When modifying, pay attention to the lens material—poor quality ones often cause frequent issues. Practical tests prove that compliant products reduce trouble. When driving, don’t just pursue brightness; practicality and safety are what matter. Being caught may affect insurance claims. I suggest evaluating the necessity before modification—after all, driving is no joke.

Was this review help?
5
0
Share
Expand All
LeEmersyn
01/13/26 2:32am

From a safe driving perspective, retrofitting lens headlights is prone to inspection by traffic police. The reason is simple: non-compliant lighting endangers both yourself and others, such as nighttime glare affecting other drivers. Regulations are strict, and modified lights require regular inspections. Tip: Choose low-glare products for modifications to ensure focused light beams. Don't overlook installation details; poor heat dissipation leads to frequent malfunctions. When driving, pay attention to the beam angle and avoid getting too close to other vehicles. If inspected, stay calm and make timely corrections. Protecting yourself and others is more important than anything else.

Was this review help?
12
3
Share
Expand All
More Forum Discussions

What are the impacts of high mileage on a car?

The impacts of high mileage on a car are as follows: 1. Battery discharge: If the car is driven short distances daily, the battery is likely to discharge. The electricity consumed by each car start takes about 2 minutes of driving to recharge. Theoretically, driving for 10 minutes a day with fewer than 4 starts won't discharge the battery. However, the battery is usually not used just for ignition. People often listen to music or use air conditioning while driving, which gradually drains the battery, leading to discharge issues. 2. Engine oil degradation: Engine oil has a shelf life. If the mileage is too high without maintenance, the lubricating effect of expired oil will decline, affecting the engine's lifespan. Additionally, quality issues arising from exceeding the maintenance period may void the warranty. 3. Increased fuel consumption: Cars frequently started cold will have higher fuel consumption than usual. During a cold start, the engine operates in an open-loop control state. This differs from closed-loop control, which is only influenced by the oxygen sensor. Open-loop control adjusts fuel injection based on data from the engine speed, water temperature, air pressure, and multiple sensors.
1
5
Share

When to Steer the Wheel When Turning a Car?

When making a left turn and noticing the road is narrow, steer the wheel when the right front corner of the car is tangent to the roadside. If the left turn road is relatively wide, you can steer the wheel in advance. Turning techniques: One method is the outside-inside-outside approach, which involves changing lanes to the outside before entering the turn, then slightly steering the wheel. When entering the turn, stay close to the inside, and when exiting, slightly steer the wheel towards the outside of the curve. Another method is slow in, fast out—reduce speed and shift gears before entering the turn, use low speed to navigate the turn, and immediately accelerate and shift up to leave after exiting the turn. Precautions for turning: Always maintain a slow speed when turning the car, and avoid steering the wheel too quickly to prevent skidding. If the car skids, immediately release the accelerator pedal, then steer the wheel towards the side where the rear wheels are skidding. Once the car returns to normal, straighten the wheel and continue driving. Avoid using the brake pedal when turning, especially emergency braking. When turning, coordinate steering the wheel with the curve and match it with the speed to ensure the turning angle is appropriate. Keep both hands on the steering wheel to prevent deviation and potential hazards.
10
3
Share

How many liters does it take to fill up a Nissan Paladin's fuel tank?

Nissan Paladin's fuel tank capacity is 73 liters, which is the officially announced data. The recommended fuel grade for Nissan Paladin is 92, with a fuel consumption of 9.3-10.9L per 100 kilometers. A full tank can cover a distance of 670-785km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
1
0
Share

What type of interface is inside the BMW 1 Series armrest box?

The BMW 1 Series armrest box contains a Type-C interface. Type-C is a USB connection interface that can be inserted either way, with dimensions of approximately 8.3mm/2.5mm. Like other interfaces, it supports USB-standard functions such as charging, data transfer, and display output. Main features of Type-C: Fast transmission: Theoretically, the maximum transmission rate of a USB-C port is 10Gb per second. However, Apple states that the USB-C port on the new MacBook has a maximum transmission rate of 5Gbps. The maximum output voltage is 20 volts, which can speed up charging time. In contrast, the USB-A type has a maximum transmission rate of 5Gbps and an output voltage of 5 volts. Multi-port output: The USB-C port on the new MacBook can transfer data, charge devices, and also serve as a video output port to connect to external display devices. Bidirectional transmission: Unlike older USB ports, which only allow unidirectional power transmission, the USB-C port supports bidirectional power transmission. This means it can send power in two ways. Therefore, users can not only charge mobile devices with their laptop but also charge the laptop using other devices or power banks.
14
0
Share

What is the solution for Peugeot 408 burning engine oil?

Peugeot 408 burning engine oil solution involves first removing the engine cylinder head and then replacing the new valve seals. The following is a specific introduction to the Peugeot 408 burning engine oil solution: 1. Cold engine: It may be burning oil when the engine is cold. When the car temperature has not fully warmed up, the engine exhaust pipe emits a large amount of blue smoke, but returns to normal after the engine warms up. 2. Aging valve seals: Caused by aging valve seals. Due to the decrease in temperature, the rubber material of the valve seal becomes completely unsealed, causing oil to leak from the valve into the combustion chamber and burn, resulting in the above phenomenon.
14
5
Share

Is the BMW 1 Series Front-Wheel Drive?

The domestically produced sedan version of the BMW 1 Series is front-wheel drive, while the hatchback version is rear-wheel drive. The hatchback BMW 1 Series is imported and also includes high-performance models. Compared to rear-wheel drive, front-wheel drive designs are less expensive in terms of both design and assembly. Front-wheel drive vehicles do not require a rear drive shaft or rear gearbox, and their transmission systems differ from rear-wheel drive systems, with fewer and more centralized components. This makes it easier to arrange other parts of the car, such as the braking system, fuel lines, and exhaust system, in the lower section of the vehicle. A front-wheel drive vehicle utilizes the front wheels for propulsion. Front-wheel drive means the engine's power is directly transmitted to the front wheels to move the vehicle forward. In other words, when moving forward, the front wheels 'pull' the rear wheels, propelling the vehicle. A rear-wheel drive vehicle utilizes the rear wheels for propulsion. Rear-wheel drive means the engine's power is transmitted to the rear wheels via a driveshaft to push the vehicle forward. Rear-wheel drive is a more traditional form of propulsion, and the earliest cars were mostly rear-wheel drive. In rear-wheel drive, the rear wheels act as the driving wheels responsible for propelling the entire vehicle, while the front wheels act as the steering wheels responsible for direction. Figuratively speaking, when moving forward, the rear wheels 'push' the front wheels, propelling the vehicle.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.