Will the Wuling Hongguang Mini drift on the highway?

1 Answers
StJuliet
07/30/25 3:05am
Wuling Hongguang Mini will drift on the highway. Its maximum curb weight of 705kg will affect its performance on the highway. Here is some extended information: 1. Wuling Hongguang Mini: The Wuling Hongguang Mini is a micro electric vehicle under the Wuling brand. The car has a wheelbase of 1940mm, with length, width, and height dimensions of 2917mm, 1493mm, and 1621mm respectively. It is a three-door, four-seater electric vehicle. 2. Motor: The Wuling Hongguang Mini is a single-motor model, with a maximum motor power of 20kw and a maximum torque of 85 Nm. This car uses lithium-ion batteries, which are commonly used in most pure electric vehicles and plug-in hybrid vehicles. Lithium-ion batteries have a lighter weight and higher energy density.
Was this review help?
20
2
Share
More Forum Discussions

What is the situation of a misfiring cylinder due to fuel injector issues?

Fuel injector misfiring causes are as follows: Fuel injector clogging: After prolonged use, fuel injectors may become clogged. Firstly, long-term carbon buildup accumulation can lead to blockage of an injector, resulting in misfiring symptoms. Secondly, fuel injectors subjected to prolonged high-pressure gasoline flow will gradually age and develop a series of issues, such as nozzle deformation and solenoid valve switch delay. Excessive fuel injection will cause an overly rich air-fuel mixture, leading to backfiring, shaking, and other fault phenomena. If one fuel injector is clogged, it may also cause "misfiring" resulting in intermittent engine shaking. Spark plug failure: As is well known, spark plugs are consumable automotive components with limited service life. For instance, standard copper-core spark plugs have a lifespan of 30,000 kilometers, platinum spark plugs can last up to 80,000 kilometers, and iridium spark plugs may reach 100,000 kilometers with proper usage. However, even if spark plugs haven't reached their lifespan limit, failures causing misfiring can occur. One major culprit is carbon deposits. Spark plug carbon buildup is reversible, and performance can be restored through cleaning.
1
5
Share

How many points are needed to pass the simulated test for Driver's License Subject 1?

Driver's License Subject 1 test has a full score of 100 points, and a score of 90 or above is required to pass. Here is some relevant information about driver's licenses: 1. Definition of a driver's license: The full name of a driver's license is a motor vehicle driving license, which is a certificate required by law for motor vehicle drivers. In China, the definition of a driver's license is: A motor vehicle driver's license is a legal document issued by the administrative department after a person who is legally allowed to learn to drive a motor vehicle has studied, mastered traffic regulations and driving skills, and passed the examination. It permits the holder to drive a certain type of motor vehicle. 2. Optimization of the content and procedures for the driver's license test: Starting from June 1, 2021, the "parking and starting on a slope" item in Subject 2 of the small automatic transmission vehicle driver's license test will be canceled. The interval between Subject 3 test appointments will be adjusted from 30 days after passing Subject 1 to 20 days. For large and medium-sized passenger and truck driver's licenses, the interval between Subject 3 test appointments will be adjusted from 40 days after passing Subject 1 to 30 days.
5
2
Share

Does using the car's heater consume fuel?

Heating in a car utilizes the engine's cooling system. During the process of cooling the engine, a small fan directs the heat into the car's interior, so it does not consume fuel. Here are the details: 1. The working principles of heating and air conditioning are different. Air conditioning works by compressing the refrigerant to liquefy it and then vaporizing it, absorbing a large amount of heat from the air to achieve cooling. When the air conditioning is turned off, the mechanical connection disengages, the compressor pulley idles, and the compressor does not work, thus not increasing the engine load. When the air conditioning is turned on, the connection engages, the compressor pulley drives the compressor to work, increasing the engine load and consuming a certain amount of fuel. 2. On the other hand, heating uses the engine's cooling system. During the process of cooling the engine, a small fan directs the heat into the car's interior. When the heating is turned off, the fan stops, and the hot air vent closes, allowing the heat to dissipate into the atmosphere. Therefore, car heating is a form of waste heat recovery and does not consume fuel.
18
1
Share

How to Avoid Encroaching on Other Lanes When Turning a Car?

Methods to avoid encroaching on other lanes when turning a car are as follows: Reduce Speed: When entering a curve, it is a driving technique to first slow down on the straight section before the curve. If the speed is too high, you should brake in advance to reduce the speed. At this point, the car's momentum is only in the forward direction, making it easier to achieve the braking effect. Drive Close to the Outer Side When Entering the Curve: Secondly, follow the principle of outer-inner-outer when exiting the curve. That is, to maximize the turning radius, drive close to the outer side when entering the curve (in the case of a left curve), then move as close as possible to the inner side (left turns stay close to the left inner side, right turns stay close to the right inner side), and maintain this until passing the apex of the curve. According to the principles of mechanics, when a vehicle turns, its inertial momentum is directed outward. If you are too close to the outer side at this time, there is a risk of veering off the curve! After passing the apex of the curve, adjust the direction according to normal traffic rules, move to the right, and accelerate to exit the curve.
5
0
Share

What are the steps to park an automatic transmission car?

Automatic transmission car parking steps are as follows: Press the brake -- Pull the handbrake -- Shift into P gear -- Release the brake -- Turn off the ignition and remove the key. Many car owners are accustomed to shifting into P gear first and then pulling the handbrake, which is incorrect. Because shifting into P gear first puts stress on the transmission, while pulling the handbrake first puts stress on the handbrake. If you shift into P gear first, the hazards are as follows: 1. If you shift into P gear first and then pull the handbrake, it's fine on flat ground, but if you happen to be on a slope, you may encounter difficulty moving the gear lever when starting the car. This is because the transmission is under stress at this time, and the locking force between the gears is very strong, making it hard to move the gear lever. 2. Not being able to move the transmission doesn't have much impact, but over time, it can wear out the transmission and reduce its lifespan. 3. In case of unexpected situations, the transmission may be directly damaged. For example, if the car is rear-ended by another vehicle, forcing the car to start.
8
2
Share

How many times can Subject 2 be scheduled?

Subject 2 can be scheduled up to five times. Here is extended information about the examination rules and precautions for Subject 2: 1. Examination Rules: (1) There are two opportunities during the examination, requiring all five items to be passed in each opportunity. If any item fails, all five items must be retaken. (2) If the first examination fails, the second examination follows immediately, with the same process as the first, using the same vehicle and the same test track, and fingerprint verification must be performed again. 2. Precautions: (1) Managing emotions is crucial. Many students who fail Subject 2 do so because they cannot alleviate their nervousness after hearing the failure announcement, leading to repeated mistakes at the same spot. (2) The second retake is the same as the first examination; during the vehicle preparation, it is essential to adjust the seat, mirrors, and fasten the seatbelt before fingerprint verification. (3) Each examination item in the test center is monitored by GPS positioning. The control line (yellow dotted line) of each item represents the examination area for that item. Once the vehicle's front passes the control line, it signifies entry into the examination for that item, and the examination rules for that item must be followed to completion.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.