Will the front passenger be fined for not wearing a seat belt in urban areas?

What is the ground clearance of the Buick GL6?

The minimum ground clearance of the Buick GL6 is 105 millimeters. The minimum ground clearance of the Buick GL6 refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. If the Buick GL6 has higher ground clearance, its off-road capability improves, but if the ground clearance is too high, the stability at high speeds may decrease. The Buick GL6 is a compact MPV under SAIC-GM Buick, featuring a 5-door, 6-seat body structure. The dimensions of the Buick GL6 are 4692 mm in length, 1794 mm in width, and 1626 mm in height, with a wheelbase of 2769 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Buick GL6 is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Buick GL6's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. If frequently traveling to remote areas or driving on rough terrain, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the undercarriage, considering its off-road performance.

19

0

Share

Reasons and Solutions for Car Lights Not Working

Here are the specific situations and solutions: 1. Headlights not working at night. First, check if the fuse is blown. If both high and low beams fail to turn on when the headlight switch is activated, inspect the fuse box for any blown fuses, then check for faults between the car light switch and the dimmer switch. Use a screwdriver to connect the dimmer switch's live wire to the high and low beam terminals separately. If the lights turn on, it indicates a problem with the dimmer switch. If only the high beam works when connected, the issue lies between the dimmer switch and the headlight or the low beam. 2. Frequent bulb burnout. If the filaments of the headlights or taillights frequently burn out during use, possible causes include a faulty voltage regulator leading to excessive voltage, poor contact in the battery terminals causing the generator to produce high no-load voltage, or a short circuit between the generator's armature and field coil. If the bulb burns out immediately upon turning on the light switch, check for open circuits in the charging line. If bulbs burn out frequently, inspect whether the generator's voltage regulator is set too high. 3. Taillight not working. While driving, if all other lights function normally except the taillight, possible reasons include a burnt-out taillight filament, poor taillight grounding, or an open circuit in the taillight wiring. During inspection, first remove the taillight bulb to check if the filament is burnt out. If the filament is intact, use a test pen or screwdriver to create a spark between the taillight's live wire terminal and ground. If no spark occurs, it indicates an open circuit in the taillight wiring; locate and repair the break. If a spark occurs, it suggests poor taillight grounding. 4. Brake light not working. Main causes include a burnt-out filament, poor grounding, a faulty brake light switch, or an open circuit in the wiring. During inspection, first remove the brake light bulb to check the filament. If the filament is intact, press the brake pedal and use a screwdriver or wire to create a spark between the brake light's live wire terminal and ground. 5. Turn signal not working. If neither the left nor right turn signals work when the turn signal switch is activated, the cause could be an open circuit in the power supply line from the flasher relay to the turn signal switch, or a fault in the flasher relay or turn signal switch.

11

4

Share

How to Turn Off Roewe Cruise Control?

While driving, press the cruise control button on the right side of the steering wheel. At this point, a green standby light for cruise control will illuminate on the dashboard. Cruise control can only be activated when the speed exceeds 50 km/h. Once above 50 km/h, press the roller (remember to press it in, not roll it). The green light will turn yellow, indicating that cruise control is now active. Below is a related introduction: 1. Activating cruise control speed: Slide switch A to the ON position to turn on the speed control system. 2. Setting cruise control speed: After the system is activated, when the car reaches the desired speed, press button B (SET) once to maintain that speed continuously. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. Upon releasing the accelerator pedal, the system will restore the speed to the set cruise speed. However, if the speed exceeds the cruise speed by more than 10 km/h and maintains that speed for over 5 minutes, the cruise speed must be reset. 3. Reducing cruise speed: Press the SET button to decrease speed by 1.5 km/h; if held, the car will continue to decelerate. Once the button is released, the current speed is stored in memory. If the SET button is released at a speed below 40 km/h, the stored value is deleted. If needed, use the SET button to reset the cruise speed when exceeding 40 km/h. 4. Increasing cruise speed: Without pressing the accelerator pedal, slide switch A to the RES position to increase the set cruise speed. Each press of the RES switch increases speed by 1.5 km/h. If held, the car will continue to accelerate. Once the RES switch is released, the current speed is stored in memory. 5. Temporarily deactivating cruise control: Press the brake or clutch pedal, or slide the switch to the OFF position to temporarily deactivate the system. The set cruise speed remains stored in memory. To resume the set cruise speed, release the brake or clutch pedal, or slide switch A to RES. If the cruise speed was not stored when temporarily deactivating, follow these steps to set a new cruise speed with switch A. First, slide switch A to the RES position and hold until the desired speed is reached. Release the switch to store the new speed in the system. 6. Completely turning off cruise control: Slide the switch to the OFF position, or turn off the ignition when the car is stationary to fully deactivate the system.

15

5

Share

Can I change the test center if I fail the Subject 3 driving test?

You cannot change the test center if you fail the Subject 3 driving test, as the test center for the driver's license examination is determined by the driving school and vehicle management office according to regulations, and examinees are not allowed to switch test centers. Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles. Subject 3 Road Driving Skills Test Content: Preparation before getting on the vehicle, simulated light test, starting, driving straight, shifting gears, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. Subject 3 Safety and Civilized Driving Knowledge Test Content: Requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge. Notes for the Subject 3 Test: 1. If the examinee's fingerprint verification fails, they must get off the vehicle to re-collect their fingerprint before queuing again for the test. 2. During the test, if the examinee's score falls below the passing score, the system will automatically prompt the examinee to pull over. After completing the pull-over action, the system will prompt the examinee to proceed to the next test. 3. After the examinee completes all required test items and drives a distance of more than 3 kilometers, the system will automatically prompt them to pull over. Upon hearing the pull-over prompt, the examinee should choose a clear curb (or solid road edge) on the test route and complete the pull-over action after confirming safety. The system will then announce the test results. 4. When walking around the vehicle to inspect its appearance and surroundings, ensure the accuracy of radar signal detection by keeping a distance of within 1 meter between the body and the vehicle. 5. If multiple examinees are preparing for the test simultaneously, after one examinee finishes the test, the next examinee must follow the standard procedure, including getting off the vehicle, preparing to get on, walking around the vehicle, and starting with the simulated nighttime light test.

1

3

Share

What does it mean when the ABS light appears on the car's dashboard?

When the ABS light appears on the car's dashboard, it indicates a malfunction in the vehicle's Anti-lock Braking System. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, which poses a significant safety hazard. There are several states in which the ABS light may illuminate, each with different causes and solutions. The details are as follows: State 1: ABS warning light stays on continuously (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. As a result, the ABS computer cannot determine the vehicle's speed or the wheel's slip rate, and thus cannot issue the appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose system wiring connections or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS warning light turns off. This may also occur if the ABS system's power supply voltage is too low, such as due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after the engine starts and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's wiring connector; ABS computer malfunction. Solution: Loosen the grounding screw on the hydraulic valve body, then retighten it. Clean the contact surface if necessary. Check if the connector gap has widened. Replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. This may also occur if the tire or wheel rim specifications are incorrect. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and use a finger to push the brake switch linkage all the way down. Then release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary.

18

1

Share

What is the fuel consumption per 100 kilometers for the Volkswagen Tiguan 1.8t?

The Volkswagen Tiguan 1.8t has a total of 8 models, with official fuel consumption data ranging from 7.9 to 8.9 liters per 100 kilometers. Among them, the Tiguan-2015-1.8TSI-Automatic Four-Wheel Drive Luxury, Comfort, and Fashion Vision models are equipped with a 160-horsepower engine, with an NEDC fuel consumption of 8.9 liters per 100 kilometers. The Tiguan-2015-1.8TSI-Automatic Two-Wheel Drive Luxury, Comfort, and Fashion models, also equipped with a 160-horsepower engine, have an NEDC fuel consumption of 8.6 liters per 100 kilometers. The Tiguan-2015-1.8TSI-Manual Two-Wheel Drive Limited Edition and Fashion models, also with a 160-horsepower engine, have an NEDC fuel consumption of 7.9 liters per 100 kilometers. The fuel grade for the Volkswagen Tiguan 1.8t is 95, with an average fuel price of 8.56 yuan per liter. The fuel cost per 100 kilometers for different models is as follows: 2015-1.8TSI-Automatic Four-Wheel Drive Luxury, Comfort, and Fashion Vision models, the fuel cost per 100 kilometers is 8.9*8.56=76.184 yuan. 2015-1.8TSI-Automatic Two-Wheel Drive Luxury, Comfort, and Fashion models, the fuel cost per 100 kilometers is 8.6*8.56=73.616 yuan. 2015-1.8TSI-Manual Two-Wheel Drive Limited Edition and Fashion models, the fuel cost per 100 kilometers is 7.9*8.56=67.624 yuan. The fuel tank capacity for all Volkswagen Tiguan 1.8t models is the same, at 63 liters. The distance that can be covered on a full tank of fuel is as follows: 2015-1.8TSI-Automatic Four-Wheel Drive Luxury, Comfort, and Fashion Vision models, the distance on a full tank is 63/8.9*100=707 kilometers. 2015-1.8TSI-Automatic Two-Wheel Drive Luxury, Comfort, and Fashion models, the distance on a full tank is 63/8.6*100=732 kilometers. 2015-1.8TSI-Manual Two-Wheel Drive Limited Edition and Fashion models, the distance on a full tank is 63/7.9*100=797 kilometers. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.

7

4

Share

Will the front passenger be fined for not wearing a seat belt in urban areas?

What is the ground clearance of the Buick GL6?

Reasons and Solutions for Car Lights Not Working

How to Turn Off Roewe Cruise Control?

Can I change the test center if I fail the Subject 3 driving test?

What does it mean when the ABS light appears on the car's dashboard?

What is the fuel consumption per 100 kilometers for the Volkswagen Tiguan 1.8t?

Which Generation Transmission is Used in the Verano?

How to Remove and Replace the Bulb on a Haval H6?

What are the driving modes of the Audi A4L?

Can Engine Oil Burning Be Claimed on Insurance?