Will the 4S shop polish after painting?

At what temperature does the car engine's cooling fan start working?

The car engine's cooling fan typically starts working when the coolant temperature reaches around 90°C. When the temperature reaches approximately 105°C, the fan begins operating at high speed. For most domestic vehicles in China, the fan usually activates between 93-95°C. The radiator fan only automatically turns on after the engine has been running for a certain period and the coolant temperature rises. If the overheating is caused by insufficient coolant, you'll need to add water. However, to prevent engine damage, you shouldn't add water immediately. Normally, you should first open the car's hood, then remove the engine cover for ventilation and cooling, and only add water after the coolant temperature has dropped.

15

2

Share

Can the Three-Way Catalytic Converter Be Thoroughly Cleaned?

The three-way catalytic converter can indeed be cleaned. Due to high sulfur content in fuel, poor fuel quality, or stop-and-go traffic congestion where fuel doesn't fully combust, excessive emissions can cause the three-way catalytic converter to accumulate a large amount of chemical complexes after some driving. There are two methods for cleaning the three-way catalytic converter: using an intravenous drip method or completely dismantling it for cleaning. The intravenous drip method requires a three-way catalytic converter cleaner, which is made from environmentally friendly solvents without chlorobenzene series, capable of powerfully removing impurities, carbon deposits, and other deposits inside the converter. Before cleaning, insert the infusion needle into the engine's rubber intake vacuum tube, set the flow controller to maximum, start the engine, and input the three-way cleaner until the engine has drawn in all the cleaning solution. Then, remove the infusion needle to complete the cleaning process.

3

0

Share

What is the appropriate tire pressure for the Lavida?

The specific tire pressure suitable for the Lavida should be based on the manufacturer's recommended value, generally maintained between 2.1 and 2.5 bar. The setting of tire pressure takes into account factors such as the vehicle's weight and chassis height. The manufacturer's recommended tire pressure can be found in the vehicle's user manual, on the label next to the driver's door, in the drawer beside the driver's seat, or on the fuel tank cap. Tire pressure refers to the air pressure inside the tire. In terms of car maintenance, the engine is the heart of the car, and its damage can lead to the end of the car's life. Tire pressure is the blood pressure of the car, and its level plays a crucial role in the car's performance and power. The Lavida is a vehicle launched by Shanghai Volkswagen, with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, and a wheelbase of 2688mm.

13

4

Share

How to Use the ABS Braking System in Cars?

The ABS braking system in cars can perform braking operations based on the distance traveled and the speed of the vehicle. When the car comes to a complete stop, releasing the brake allows the car to achieve an immediate braking effect. This function is generally activated automatically at speeds above 30 kilometers per hour. The working principle of braking involves converting the kinetic energy of the moving car into frictional heat energy to dissipate it. Common braking devices include drum brakes and disc brakes. During braking, the car's brake pedal is pressed, which activates the brake lever linkage, transmitting the force to the brake shoes on the brake drum, clamping the brake, and causing the wheel disc to slow down or stop the car.

11

0

Share

How to Use the Jack on a Volkswagen Car?

Usage method of the Volkswagen car jack: When using the jack, it must be placed on a solid ground. If the ground is relatively smooth, you can place an anti-slip pad under the jack. Ensure that the base of the jack is fully supported on the ground, then rotate the lever to raise the lifting claw of the jack. Once the lifting claw is close to the car, position it to grip the vertical edge of the car's side beam, ensuring that the jack does not slip when lifting the car. Then, turn the jack handle to raise the car's wheels off the ground. The Volkswagen Lavida is a sedan produced by SAIC Volkswagen, with body dimensions of 4670mm in length, 1806mm in width, 1474mm in height, and a wheelbase of 2688mm.

3

1

Share

What engine does the Suzuki Beidouxing x5 use?

Suzuki Beidouxing x5 is equipped with a 1.4-liter naturally aspirated engine across the entire lineup, which is the same engine used in the Suzuki Beidouxing. The 1.4-liter naturally aspirated engine in the Suzuki Beidouxing x5 delivers 97 horsepower and a maximum torque of 120 Nm, with the maximum power achieved at 6,000 rpm and the maximum torque at 3,600 rpm. This engine is paired with a 5-speed manual transmission. The Suzuki Beidouxing x5 is a fully upgraded product meticulously developed by Changhe Suzuki, with body dimensions of 3,664 mm in length, 1,610 mm in width, and 1,722 mm in height, and a wheelbase of 2,485 mm.

15

5

Share

Will the 4S shop polish after painting?

At what temperature does the car engine's cooling fan start working?

Can the Three-Way Catalytic Converter Be Thoroughly Cleaned?

What is the appropriate tire pressure for the Lavida?

How to Use the ABS Braking System in Cars?

How to Use the Jack on a Volkswagen Car?

What engine does the Suzuki Beidouxing x5 use?

How long can you drive after the tire pressure warning light comes on?

What are the body dimensions (length, width, height) of the Accord?

What is the model number of the original spark plug for the Focus?

How to replace the battery in the remote key of the Soueast DX7?