···
Log in / Register

What engine is used in the Trumpchi GM6?

1Answers
JeffreyFitz
07/28/2025, 02:17:15 PM

Trumpchi GM6 is equipped with a 1.5T turbocharged engine. The engines in the National V and National VI models have different performance specifications. The National V model's engine has a maximum power of 124 kW and a maximum torque of 265 Nm, while the National VI model's engine has a maximum power of 126 kW and a maximum torque of 265 Nm. In terms of transmission, the manual transmission model of the Trumpchi GM6 is paired with a 6-speed manual gearbox, and the automatic transmission model is paired with a 7-speed dual-clutch transmission. The body dimensions of the Trumpchi GM6 are 4780mm in length, 1860mm in width, and 1730mm in height.

Was this review help?
116
Share
More Q&A

How to Install a Child Safety Seat?

Installation methods for child safety seats: 1. Place the safety seat on the rear seat and connect it to the ISOFIX anchors to enhance stability; 2. Secure the seat with the vehicle's seat belt. The belt connection ensures a snug fit at the top of the safety seat. After fastening, always readjust the belt to prevent loosening over time; 3. Once the seat belt is properly secured, the installation is essentially complete. Then, simply tuck away the excess seat belt around the safety seat. When purchasing a safety seat, always check for ISOFIX compatibility to avoid mismatches, and verify whether your vehicle model is equipped with ISOFIX anchors.
109
Share

How to reset when the tire pressure light comes on?

Methods to reset when the tire pressure light comes on: 1. For models with a tire pressure reset button, press and hold the tire pressure monitoring reset button; 2. Some models can be set through the tire pressure monitoring function on the central control screen. Turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a beep, then release it. At this point, the tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally the dashboard warning light will turn off. Strictly speaking, tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays a crucial role in the performance and power of the car.
116
Share

What does a yellow-label vehicle mean?

A yellow-label vehicle refers to gasoline vehicles whose emission levels at the time of new vehicle type approval were below the National I emission standard and diesel vehicles below the National III emission standard. These vehicles typically have high levels of tailpipe emissions, high concentrations of pollutants, and poor emission stability. They are called yellow-label vehicles because they are affixed with a yellow environmental label. In terms of emission limits, the emissions from one yellow-label vehicle are equivalent to those from 5 National I vehicles, 7 National II vehicles, 14 National III vehicles, or more than 20 National IV gasoline vehicles. Such vehicles can be driven on the road if they pass the periodic environmental inspection and meet the relevant vehicle emission standards, receiving a yellow environmental inspection compliance label. Due to their high individual emissions, yellow-label vehicles should be prioritized for control and phase-out.
114
Share

What to Do When the Car Engine Temperature Warning Light Comes On?

When the car engine temperature warning light comes on, it alerts the driver that the engine is overheating. You should immediately pull over to a safe area without turning off the engine, open the hood to allow heat to dissipate, and then check if the coolant level in the auxiliary tank is too low. If the coolant level is below the 'min' line, it indicates that the coolant is insufficient. If possible, add coolant. In case coolant is not available, mineral water can be used as a temporary substitute, but it's important to replace it with new coolant as soon as possible. Coolant, also known as antifreeze coolant, is designed to prevent freezing. It protects the radiator from cracking and the engine cylinder block from freezing damage during cold weather when the vehicle is parked.
109
Share

What are the reasons and solutions for car air conditioning not cooling?

Reasons and solutions for car air conditioning not cooling: 1. After prolonged use, the refrigerant in the car air conditioning may deplete, leading to insufficient cooling and affecting the air conditioning performance. In this case, adding some air conditioning refrigerant can help; 2. If there is a refrigerant leak, both the internal and external units of the car air conditioning will operate normally but without cooling effect. Check the air conditioning pipelines, air conditioning pump, condenser, and evaporator components for any damage causing the refrigerant leak, and replace the faulty parts if necessary; 3. If the car air conditioning is not cleaned after prolonged use, various impurities may cover the condenser, preventing it from dissipating heat properly. This can result in excessive pressure and temperature in the air conditioning system, causing the air conditioning pump to stop cooling. Use a high-pressure water gun to clean the condenser fins and then dry them with a high-pressure air gun; 4. A dirty air filter can block the air conditioning filter, obstructing most of the cold air and making the cooling effect less noticeable, which may be mistaken for the car air conditioning not cooling. Therefore, it is important to regularly clean or replace the filter.
111
Share

Which One is the Accelerator?

Car's accelerator is on the right. From the perspective of human body structure: For most people, the right foot is much more sensitive in terms of strength than the left foot, unless they are left-handed, but in reality, left-handed people are rare. Therefore, controlling the accelerator and brake with the right foot is more sensitive, making driving smoother without jerking. Moreover, in terms of human emergency response capability, the right foot is also faster than the left foot. At this point, some people may start to doubt that the left foot clutch requires more sensitivity than the right foot. However, compared to the time and force required to press the clutch, the right foot is engaged for a longer duration. Over time, even light pressing can become very strenuous, which is why the right foot's endurance is more developed than the left foot's. From the perspective of car structure: This arrangement is more reasonable for connecting the engine configuration and aligns better with the theoretical design of automobiles.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.